By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
Vacuum casting is an elastomer casting process in which the liquid material is drawn into the mould by a vacuum. When air entrapment is an issue, there are fine details or undercuts, or the material is fibre or wire reinforced, this procedure is used.
The Global High Pressure Vacuum Casting Market accounted for $XX Billion in 2021 and is anticipated to reach $XX Billion by 2026, registering a CAGR of XX% from 2022 to 2027.
The Vacu2 system from Pfeiffer can evacuate both the shot sleeve and the mould cavity, preventing air pockets in the die casting process and resulting in higher component quality. In terms of vacuum achieved, process safety, and process control, the Vacu2 eliminates the drawbacks of traditional procedures.
Furthermore, because the technique is less prone to leakage and conductivity, the time and money necessary for mould construction can be decreased. For the die casting sector, Pfeiffer Vacuum offers a leak detection solution.
The VC series Vacuum Pressure Casting Machines from Blue Power Casting Systems quickly achieve a precisely set pressure. Depending on the specified programme, the Turbo Pressure will start automatically and precisely at the required moment for all program-controlled VC models.
Vacuum Pressure Casting Machine VC 400, which produces reasonable quantities but requires significantly more capacity than the MC machines.
Vacuum Pressure Casting Machine VC 500 Greater performance (shorter casting times) with even larger crucibles and flask capacities (flasks up to 160 mm / 400 mm H) is required for larger production volumes with continuous casting operation.
A crucible capacity of up to 25,000 ccm (=60 kg Al) and a flask size of 600 mm x 800 mm are available on the VC 12000 V Vacuum Pressure Casting Machine.
