By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
A Bessel filter is a form of analog linear filter used in electronics and signal processing that preserves the wave structure of filtered signals in the passband and has a maximally flat group/phase delay (maximally linear phase response).
Audio crossover systems frequently use Bessel filters. As filter order rises, the Bessel filter tends to take on the same shape as the Gaussian filter.
Even though the Bessel filter has a little bit of overshoot compared to other typical frequency-domain filters like Butterworth filters, the Gaussian filter’s time-domain step response has zero overshoot.
As the filter’s order is raised, it has been observed that the impulse response of Bessel-Thomson filters tends to become Gaussian.
A Bessel filter is a form of analogue linear filter with a maximally flat group or phase delay used in RF and other electrical applications.
This keeps the waveform of signals inside the pass-band intact. The wave form and phase of components within a signal must be preserved in various RF applications, particularly audio applications.
There are numerous other examples than audio crossover units. The Bessel filter is the perfect solution in these situations.
As would be predicted, compared to other types of filters of the same order, the Bessel filter offers a slower transition from pass-band to stop-band.
The Global BESSEL FILTERS market accounted for $XX Billion in 2021 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2022 to 2030.
For signal conditioning applications where Bessel or Butterworth filters are required, the SRS SIM965 Analog Bessel Filter is the best choice.
Butterworth filters give excellent pass-band flatness with considerable overshoot, whereas Bessel filters offer clean step response (negligible overshoot) and linear phase response.
The front panel allows users to choose between high-pass and low-pass filtering. For any filter type, a choice of 12, 24, 36, or 48 dB/octave rolloff is offered, and cutoff frequencies are controlled with 3-digit resolution.
The SIM965 Bessel filter has unity gain and receives input signals between 5 V. With a bandwidth of more over 1 MHz and low noise and harmonic distortion, it is perfect for delicate analog applications.
The SIM910 JFET preamplifier or the SIM911 BJT preamplifier should be used if signal amplification is required.
