By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
Flexible circuit board, or “flexible board,” is another name for FPC circuit board. FPC is a type of printed circuit board that is used in the industry. It is made of a flexible insulating substrate, usually polyimide or polyester film.
FPC has many advantages over hard printed circuit boards. Because it is able to bend, roll, and fold, and because it can meet the needs of electronic products in the direction of high density, miniaturization, and high reliability, FPC has been widely used in space, the military, mobile communications, laptop computers, computer peripherals, personal digital assistants, and other fields or products.
It is strictly forbidden to use bare hands to touch soft plates. D. The FPCs should be placed as far from the center of the silica gel as possible, and each plate should be spaced at a distance of 2 cm.
Except for special requirements, maintain this stack of ten layers, with the number of FPCs placed on each layer determining the number of pendulable FPC layers per 1PNL plate size (the distance between the plate and the four sides of the silica gel should remain above 7 cm).
The Global FPC Quick Press Machine market accounted for $XX Billion in 2022 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2023 to 2030.
TPX detached film steel, silica gel, and dust adhesive cloth or dusting paper to clean steel prior to the production of the following processes: lamination and opening die feeding / closed die prepressing / cooling / opening / cutting 1. Sundries, board, silica off-film surface dust, etc.
The FPC launched by Technic should have the same openings and layers, and each layer should be the same thickness (a single panel cannot be mixed with a multilayer pcb, for example).
Additionally, the pictures are roughly arranged in the same way. When the detached film is placed, the FPC coating surface or paste reinforcement surface should be facing upward and completely covered by the soft plate. After the operation, the stacked FPC ought to be laid flat on the transport belt. move on to the next stage.
Every opening and layer of the FPC ought to be the same, and the thickness of each layer ought to be the same (a single panel cannot be mixed with a multilayer pcb, for instance).
Additionally, the pictures are roughly in the same order and position. The detached film should be flat and completely covered by the soft plate when it is placed, with the FPC coating surface or paste reinforcement surface facing upward. The stacked FPC ought to be laid flat on the transport belt following the operation.
