By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
Widespread commercialization of natural stone wire sawing is taking place. This technology is increasingly employed for slabbing granite blocks on multi-wire machines in addition to rock extraction and processing with single wires made up of a large number of diamond-impregnated beads attached onto a steel rope.
New tool designs and compositions are required when stone sawing equipment becomes more sophisticated. Following the circular saw segment design rules out of habit is usual. Poor tool performance is frequently an unfavourable outcome.
It has been widely employed in the mining of mine stone because the wire sawing machine cutting technology has the advantages of being more effective, safer, greater yield, and less polluting than the old quarrying method.
It introduces the multi-rope wire sawing machine’s structural innovation. Analyzed are the effects of cutting speed and feed rate on the wear of diamond bead rope and the effectiveness of the wire sawing machine. And based on this, the motor is controlled by PID to determine the ideal speed value.
Global high-performance diamond wire saw machine market accounted for $XX Billion in 2023 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2024 to 2030.
The ground-breaking ROV (remotely operated vehicle) Diamond Wire Saw has been unveiled by Mactech Offshore.
When cutting equipment for abandonment operations, the ROV Diamond Wire Saw was created to focus on worker and environmental safety while addressing economic efficiency and advantages.
The ROV Diamond Wire Saw gives operators and contractors the ability to keep divers out of the water, maintain controllable and precise cuts, and operate at a subsea weight of roughly 160 lbs. Innovative solutions frequently result from innovative equipment.
Both surface-controlled and ROV Diamond Wire Saws are available from Mactech Offshore. To define the scenario for a subsea operation, a number of factors and levels of involvement must be assessed when considering ROV-operable.
What makes Mactech Offshore’s capabilities truly exceptional is its adaptability in the subsea and underwater machining fields. With equipment that can cut wire from four inches to 102 inches and a growing fleet of 36 diamond wire machines that have completed more than 500 diamond wire cuts successfully, no job is too big or too small.
