By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
A versatile tool called the CT/PT Analyzer was created specifically for analysing voltage and current transformers used for protection or measurement. Only the test current and voltage parameters need to be set; after that, the instrument will automatically boost voltage and current and display the test results in a short amount of time.
The CT/PT Tester enables the test voltage method to test bushings CTs mounted on transformers or inside switchgear, making it appropriate for both laboratory and on-site detection. Test results may also be recorded and printed.
All types of CT/PT can be tested using a CT/PT Analyzer in accordance with IEC standards. It is a piece of equipment that offers a high return on investment. The CT/PT analyzer is the perfect instrument for CT/PT manufacturers, testing labs, substations (up to 765KV), power plants, etc. thanks to the capabilities listed below.
Full-featured JYH C CT PT Analyzer can be used for tests of various PTs, including excitation characteristics of the electromagnetic unit, ratio, polarity, secondary winding resistance, secondary burden, ratio error, and phase displacement.
It can also satisfy the test requirements of various CTs (include TP class), including the excitation characteristics (i.e., volt-ampere characteristics), ratio, secondary winding resistance, secondary burden, ratio error, and phase displacement.
The Global CT/PT Analyzer market accounted for $XX Billion in 2023 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2024 to 2030.
The CT/PT Analyser MVCT from Megger offers precise equipment for autonomously testing single and multi-ratio CTs and VTs, as well as a microprocessor-controlled variable voltage and current output. Up to 30kV knee points for CT.
Demagnetization, Knee Points, Ratios, Saturation Curves, Winding Resistances, Polarities, and Phase Deviation are all part of the CT group testing (on all taps of multi-ratio CTs). In addition to performing secondary burden tests, VT testing also includes tests for demagnetization, ratio, winding resistance, polarity, and phase deviation.
Megger MRCT is a compact, reliable, and portable device used to test current transformers for demagnetization, ratio, saturation, winding resistance, polarity, phase deviation, and insulation. The knee points, saturation curves, and ratio errors are all computed automatically by the MRCT.
The MRCT offers precise instrumentation and a microprocessor-controlled variable voltage and current output for autonomously testing single and multiple ratio CTs, which cuts down on testing time and boosts productivity.
Time Domain Reflectometers (TDR), HVDC test kits, VLF test kits, portable cable fault locators, HV cable fault locators, sheath fault locators, cable test van systems, fault pinpointing tools, surge wave generators, cable diagnostics, cable route tracer, cable identification kits, overhead line locating tools, and cable height metres are some examples of the equipment used to locate cable faults.
Gas detection cameras, optical gas imaging cameras, hand-held infrared thermal imaging cameras, Thermovision cameras, Thermography cameras, fixed automation thermal cameras, infrared thermometers, real-time thermal imaging cameras, infrared thermometers, and IR Windows.
