By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
The secure integration of a sensor into open tanks and channels is made possible by an immersion housing, a durable, cost-effective piece of equipment. For pH, DO, conductivity, and turbidity measurements, these immersion sensor holders are suitable.
They are also made to survive challenging application settings. In open tanks, reactors, aeration basins, and open vessels, an immersion housing is a piece of hardware that is installed.
Conductivity, pH, dissolved oxygen, and turbidity sensors measuring 120 mm can be fitted into these housings. Immersion housings made by InDip are intended to integrate sensors in a reliable, affordable way.
The Global Immersion Sensor Housing Market accounted for $XX Billion in 2022 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2023 to 2030.
The immersion temperature sensor TIC uses a thermistor sensing element NTC 10K or a platina sensing element PT1000 as its direct output temperature sensor. Other sensing elements are available upon request. The limits are +/- 0.22°C for NTC 10K and +/- 0.42°C for PT1000 for the immersion temperature sensor TIC at 25°C.
The sensing element for the TIC immersion temperature sensor is found at the end of the probe, and it has a straightforward 2-wire connection (3-wire and 4-wire upon request).Steel of superior grade is used to construct the immersion temperature sensor’s probe.
For operation pressures up to 16 bar and temperatures up to 0 +150°C, the brass pocket BRPS for immersion temperature sensor TIC can be utilised. The stainless steel pocket SSPCA for immersion temperature sensor TIC can withstand temperatures of up to +400°C and operating pressures of up to 40 bar.
For the immersion temperature sensor TIC, the pockets are made of brass (BRPS) and stainless steel (SSPCA).
Standard probe length is 100 mm; other probe lengths of 50, 150, 200, 300, and 400 mm are available upon request.
Stainless steel probe with a 6mm diameter plastic housing material with IP65 protection,Housing dimensions are 75x69x44 mm, omitting the cable entry gland, which has an M16x1.5 thread and fits cables with a diameter of 4 to 10 mm
