Global Automotive Alternator Market 2023-2030

    In Stock

    GLOBAL AUTOMOTIVE ALTERNATOR MARKET

    INTRODUCTION

     

    With the introduction of electric starting motors in automobiles, batteries were widely used. For over fifty years, the automobile industry depended on dynamos to recharge batteries with direct current. The alternator system was already common in heavy-duty industrial applications.

     

    However, applying the concept to the technological restrictions of motor vehicles in an era when electrical energy requirements were relatively modest proved too difficult.

     

    Converting the alternating power produced by the alternator to the direct current required by the battery was, in fact, a significant challenge.

     

    infographic: Automotive Alternator Market, Automotive Alternator Market Size, Automotive Alternator Market Trends, Automotive Alternator Market Forecast, Automotive Alternator Market Risks, Automotive Alternator Market Report, Automotive Alternator Market Share

     

    The magnetic field in a motor vehicle alternator is formed by the rotor (which is rotated by the engine), while voltage is produced in the stator (which is attached to the alternator body and therefore “static”). The rectifying diodes or diode bridge then correct this current.

     

    The alternator concept is based on the notion that a conductor’s movement in respect to a magnetic field produces a voltage across its terminals. The conductor in this example spins in a magnetic field.

     

    The stronger construction of automotive alternators allows them to use a smaller pulley so as to turn faster than the engine, improving output when the engine is idling.

     

    The majority of alternators employ a revolving magnetic field, however linear alternators are used on occasion.

     

    In theory, any alternating current electrical generator can be termed an alternator, although the term generally refers to tiny rotating machinery powered by automobile and other internal combustion engines.

     

    Alternators in power plants powered by steam turbines are referred to as turbo-alternators.

     

    GLOBAL AUTOMOTIVE ALTERNATOR MARKET DEVELOPMENTS AND INNOVATIONS

     

    S No Overview of Development Development Detailing Region of Development Possible Future Outcomes
    1 DENSO to mass-produce automotive alternators equipped with newly developed high-efficiency diodes DENSO, the world’s second largest mobility supplier, today announced that it has developed a high-efficiency diode for alternators for gasoline and diesel engine vehicles with the semi-conductor supplier, Hitachi Power Semiconductor Device, Ltd. Production of alternators equipped with newly developed diodes will start for vehicles Global This would enhance better EV Technologies and production

     

     

    Automotive alternators in the Bosch ALH Series are a customized series created to specifically address the requirements of hybrid and electric vehicles (HEVs).

     

    HEVs have becoming more popular as the automotive industry moves toward more environmentally friendly and sustainable transportation options because of their lower emissions and higher fuel efficiency.

     

    Through the efficient and dependable power generation they offer, the ALH Series alternators are essential components in these vehicles. The ALH Series alternators are built on a foundation of innovation and environmental responsibility from Bosch.

     

    To support the complex electrical systems used in hybrid and electric vehicles, these alternators are designed using cutting-edge technology. 

     

    The ALH Series concentrates on regenerative capabilities, enabling the collection and conversion of kinetic energy during braking and deceleration into electrical energy for recharging the vehicle’s battery pack.

     

    This is in contrast to standard alternators used in internal combustion engine (ICE) vehicles. A crucial component of hybrid and electric vehicles that helps them maximize energy efficiency and increase their range is the regenerative charging mechanism.

     

    The ALH Series alternator is able to capture the kinetic energy that would ordinarily be lost as heat as the vehicle slows down or brakes. The battery of the car is then used to convert and store this electrical energy, which improves the hybrid or electric powertrain’s overall efficiency.

     

    The ALH Series alternators are created to suit the unique power requirements of hybrid and electric vehicles in addition to their regenerative capabilities.

     

    It is critical to have an alternator that can generate enough power output to fulfill these needs because modern vehicles rely more heavily on electrical systems to operate numerous components, drive the wheels, and drive the engine.

     

    For optimum performance and efficiency, Bosch’s ALH Series alternators are precisely calibrated to match the special electrical needs of HEVs. Finding compact and lightweight solutions without sacrificing power generation capabilities is one of the key problems in building alternators for HEVs.

     

    By making use of cutting-edge materials and cutting-edge engineering methods, the ALH Series overcomes this problem and produces a small and light design.

     

    This not only makes the engine compartment of the car smaller, but it also makes the whole car lighter, which helps electric cars run more efficiently and have longer ranges.

     

    The ALH Series alternators also include cutting-edge temperature management capabilities to guarantee dependable performance under a variety of circumstances.

     

    The thermal management of electrical components becomes essential for ensuring maximum performance and lifetime since hybrid and electric vehicles generate less waste heat than conventional ICE vehicles.

     

    To effectively control temperatures and prevent key components from overheating, Bosch’s ALH Series alternators are fitted with sophisticated cooling systems.

     

    The ALH Series’ complete connection with the entire electrical architecture of the vehicle is another feature that distinguishes it.

     

    The ALH Series alternators from Bosch, a pioneer in automotive electronics, are made to integrate seamlessly with the vehicle’s power electronics and battery management systems.

     

    Through this integration, the charging process is intelligently controlled by the computer systems of the car, guaranteeing that the battery is always at the ideal state of charge.

     

    GLOBAL AUTOMOTIVE ALTERNATOR MARKET DYNAMICS

     

    SI No Timeline Company Developments
    1 January 2022 Denso Denso to Mass-produce Automotive Alternators Equipped with Newly developed High-efficiency diodes

     

    2 January 2021 Valeo Valeo, an automotive supplier, and E.C.S have formed a new cooperation. Valeo offers to creative solutions to address three primary challenges: smart mobility, intuitive driving, and CO2 reduction.
    4 January 2021 WAI Global WAI Global, a premier global parts manufacturer for the heavy duty, agricultural, automotive, industrial, and power sports aftermarket, is now featuring its complete line of starters and alternators ideal for construction equipment.

     

    Alternators are used in contemporary vehicles to charge the battery and power the vehicle’s electric system while the engine is operating.

     

    Alternators offer a significant benefit over direct-current generators in that they do not use a commutator, making them simpler, lighter, less expensive, more robust than a DC generator, and the slip rings allow for significantly prolonged brush life.

     

    The automotive alternator market is to expand due to increased car manufacturing throughout the world. Furthermore, increased adoption of electric cars due to environmental problems such as rising CO2 emissions that cause air pollution is projected to drive demand for the automotive alternator market.

     

    The automotive alternator provides several advantages to various off-road and emergency vehicles. Off-road vehicles, for example, especially those carrying a big quantity of snow plough, might benefit from alternators, because a vehicle equipped with a snow plough may demand a large output alternator because to the large drag on the electrical system.

     

    Developing countries all around the world are taking steps to increase passenger automobile sales. For example, during the transition from BS-IV to BS-VI, India’s finance minister declared that BS-IV passenger automobiles may be registered until March 31, 2020.

     

    This has resulted in a modest increase in passenger automobile sales in the country.

     

    Because of government-initiated FDI for multinational automotive players, good economic circumstances, and the existence of significant automotive manufacturing sectors, Asia-Pacific is anticipated to have the greatest market for the automotive alternator industry.

     

    infographic: Automotive Alternator Market, Automotive Alternator Market Size, Automotive Alternator Market Trends, Automotive Alternator Market Forecast, Automotive Alternator Market Risks, Automotive Alternator Market Report, Automotive Alternator Market Share

     

    GLOBAL AUTOMOTIVE ALTERNATOR MARKET SEGMENTATION

     

    The Global Automotive Alternator Market can be segmented into following categories for further analysis.

     

    Automotive Alternator Market By Vehicle Usage Classification Type

    • Passenger / Residential Usage
    • Commercial Usage

     

     

    Automotive Alternator Market By Technological Usage Type

    • IC Engine Usage
    • Hybrid Propulsion Engine Usage

     

    Automotive Alternator Market By Regional Classification

    • Asia Pacific Region – APAC
    • Middle East and Gulf Region
    • Africa Region
    • North America Region
    • Europe Region
    • Latin America and Caribbean Region

     

    RECENT TECHNOLOGICAL TRENDS IN GLOBAL AUTOMOTIVE ALTERNATOR MARKET

     

    An alternator is a power generator located within a vehicle that serves as a power source for the electricity utilized in the vehicle, such as the audio or air-conditioning system. Because it relies on the engine’s power to operate, it consumes more gasoline while generating energy.

     

    infographic: Automotive Alternator Market, Automotive Alternator Market Size, Automotive Alternator Market Trends, Automotive Alternator Market Forecast, Automotive Alternator Market Risks, Automotive Alternator Market Report, Automotive Alternator Market Share

     

    Previously, alternators generated electricity continuously, but this new alternator optimises engine fuel consumption using regenerative control technology, which regenerates power while the vehicle is decelerating and lowers consumption by not generating power at other times.

     

    The increasing trend has been through the development of the New Coolant based technology which has been adopted by Nissan Corporation.

     

    When decelerating, the engine runs even without the supply of fuel. Alternators use this energy to generate power and charge batteries.

     

    It is called energy regeneration and recovers the unused kinetic energy during deceleration as electrical energy. Using this recovered electrical energy in the navigation and air-conditioning while the engine is consuming fuel means power generation from the engine and fuel consumption can be reduced.

     

    Further, regenerating and recovering deceleration energy means charging can be controlled until a vehicle reaches a lower speed. The aim is for a high amount of charge over the longest time possible.

     

    To regulate battery operations, Ford created the power control module (PCM), while BMW introduced the intelligent alternator control (IAC).

     

    The PCM monitors the temperature of the engine, battery, and overall electric demand, and charges the battery to supply the needed power, whereas the IAC is used to create enough electricity to power the onboard electronic components of a car during braking and overrun conditions.

     

    Stringent fuel efficiency and pollution requirements are driving original equipment manufacturers (OEMs) to update their cars with 48V electric architecture. The improved 48V hybrid systems include hybrid powertrains and battery control systems.

     

    infographic: Automotive Alternator Market, Automotive Alternator Market Size, Automotive Alternator Market Trends, Automotive Alternator Market Forecast, Automotive Alternator Market Risks, Automotive Alternator Market Report, Automotive Alternator Market Share

     

     

     

    RECENT DEVELOPMENT

     

    Hitachi automobile Systems sells the premium automobile part known as the Hitachi LR180-769B alternator. Due to its dependable performance, robustness, and effective power generating characteristics, this alternator model has become more well-liked in the automobile industry.

     

    The passenger cars, light trucks, and commercial vehicles that the LR180-769B alternator is intended to serve all have different electrical needs.

     

    It has cutting-edge features and high-quality parts to guarantee optimum charging performance and dependability. This alternator is designed to withstand difficult working circumstances and provide reliable power output.

     

    The compact design of the LR180-769B alternator is one of its primary characteristics. It can therefore be installed in vehicles with limited space.

     

    The small size makes it simpler to integrate into the engine compartment, guaranteeing effective use of the available space without sacrificing performance.

     

    The LR180-769B is a flexible option for car makers because it is made to be compatible with a variety of vehicle models.

     

    The large output capacity of the LR180-769B alternator ensures enough power generation for the automotive electrical systems.

     

    It is made to effectively power the electrical parts of the car while simultaneously charging the battery. By doing this, even in challenging circumstances, the battery is kept charged and the electrical system performs at peak performance.

     

    The LR180-769B’s large output capacity makes it appropriate for vehicles with higher electrical loads, such as those with extra accessories or high-powered music systems.

     

    A crucial feature of the LR180-769B alternator is its durability. To assure the durability and dependability of this alternator model, Hitachi Automotive Systems used strong construction methods and high-quality materials.

     

    It is a dependable option for a variety of cars because it is made to function effectively even in conditions of intense vibration and excessive temperature.

     

    A constant and accurate charging performance is maintained thanks to the superior voltage control technology found in the LR180-769B alternator.

     

    With the help of this technology, the electrical system of the car is guaranteed a steady stream of regulated power, preventing overcharging or undercharging of the battery.

     

    The LR180-769B’s constant voltage output aids in the overall effectiveness and durability of the car’s electrical systems.

     

    The LR180-769B alternator is additionally made to be simple to install and maintain. It is designed to be a direct fit replacement for the factory alternator, making installation simple.

     

    The alternator’s design makes mounting points and connectors easily accessible, making replacement easier. The LR180-769B also requires little upkeep, which lowers the overall cost of ownership and guarantees the vehicle has a dependable power source.

     

    Hitachi Automotive Systems sells the small and light-weight Hitachi LR140-415 alternator for automobiles. It is especially made to fulfill the electrical needs of motorbikes and small passenger cars.

     

    This alternator, despite its diminutive design, has effective power generation and dependable charging capabilities, making it a popular option in the compact vehicle market.

     

    The compact size of the Hitachi LR140-415 alternator is one of its primary characteristics. Its smooth integration and ease of installation into cars with restricted space are guaranteed by its design.

     

    This makes it the perfect option for motorcyclists and tiny passenger cars where making the most of available space is essential. The adaptability of this alternator is increased by the small form, which also permits more flexibility in mounting locations.

     

     

    AUTOMOTIVE ALTERNATOR MARKET COMPETITIVE LANDSCAPE

     

    SI No Timeline Company Developments
    1 March 2022 Mitsubishi Mitsubishi Electric Automotive America Inc. has signed a long-term agreement with Vipar Heavy Duty, Crystal Lake, Illinois, to make its heavy duty electrical components available to more than 500 Vipar Heavy Duty distributors
    2 February 2022 Cummins Cummins and Meritor have announced that they have reached an agreement under which Cummins will purchase Meritor. Cummins will pay $36.50 in cash per Meritor share under the terms of the agreement, for a total transaction value of about $3.7 billion, including assumed debt and net of acquired cash.

     

    Its purpose is to transform electrical energy into mechanical energy. Alternators serve an important role in keeping a vehicle’s different functions functioning at the same time, and they are always under pressure to accept new features.

     

    Producers must stay abreast of the rising technology and intelligence in automobiles in order to maintain their position as alternator manufacturers.

     

    Robert Bosch has been part of development for high technology alternators that are focused on provisioning specific key automotive functions in the market model of operation. It has focused itself on the Commercial Automotive segment of the market.

     

    Bosch has developed a series of superior Long-Haul alternators exclusively for the American heavy-duty market. These alternators have been specially engineered, employing cutting edge technology.

     

    The have high temperature resistance to supply more power for critical electrical systems which also includes the operability of advanced performance technology that delivers more power and greater efficiency than competitive alternators helps to maximize battery life by reducing battery deep cycling.

     

    Denso Corporation is pioneering in the alternator market considering their high quality and standards of operability.

     

    The alternators are focused on provisioning better factors of establishment which include light weight, high efficiency, and durability under the most gruelling conditions that make them operable under harsh conditions.

     

    The Rotor slip rings are buffed to an 8-micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-standard  lubricants.

     

    infographic: Automotive Alternator Market, Automotive Alternator Market Size, Automotive Alternator Market Trends, Automotive Alternator Market Forecast, Automotive Alternator Market Risks, Automotive Alternator Market Report, Automotive Alternator Market Share

     

    They are offered in versions from 40 to 160 amperes and beyond for hundreds of specific vehicle applications, all alternators meet DENSO’s rigorous First Time Fit standards.

     

    AUTOMOTIVE ALTERNATOR MARKET COMPANIES PROFILED

     

    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in theIndustry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2023-2030
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2023-2030
    19 Market Segmentation, Dynamics and Forecast by Application, 2023-2030
    20 Market Segmentation, Dynamics and Forecast by End use, 2023-2030
    21 Product installation rate by OEM, 2023
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2023
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop