Global Automotive Hydrogen Storage Tank Market 2024-2030

    In Stock

    AUTOMOTIVE HYDROGEN STORAGE TANK MARKET

    KEY FINDINGS

     

    1.   The global automotive hydrogen storage tank market is expected to continue to grow rapidly in the coming years, driven by the increasing adoption of FCEVs and the growing demand for hydrogen refueling infrastructure.
    2. High-pressure compressed hydrogen gas tanks are the most common type of hydrogen storage system used in FCEVs. The demand for high-pressure compressed hydrogen gas tanks is expected to continue to grow rapidly in the coming years, driven by the increasing adoption of FCEVs.
    3. Liquid cryogenic hydrogen tanks have the potential to store more hydrogen in a smaller volume, which could make them more attractive for use in future FCEVs. However, liquid cryogenic hydrogen tanks are more complex and expensive to produce than high-pressure compressed hydrogen gas tanks.
    4. Governments around the world are providing financial support for the development and commercialization of hydrogen storage technologies. This support is helping to reduce the cost of hydrogen storage systems and is making them more competitive with traditional gasoline-powered vehicles.
    5. The major players in the global automotive hydrogen storage market include Linde, Air Liquide, Worthington Cylinders, Luxfer Gas Cylinders, Hexagon Composites, H Bank Technologies, Chart Industries, Cella Energy Limited, American Elements, Sigma-Aldrich, Hanwha Solutions/Chemical Corporation, Eutectix, Pragma Industries, Ilika, and Fosroc.
    6. The growth of the automotive hydrogen storage market is also dependent on the growth of the hydrogen refueling infrastructure. Governments and private companies are investing in the development of hydrogen refueling stations, which will make it easier for FCEV owners to refuel their vehicles.

     

    INTRODUCTION TO AUTOMOTIVE HYDROGEN STORAGE TANK MARKET

    The Hydrogen and Fuel Cell Technologies Office (HFTO) is working on onboard car hydrogen storage systems that will enable for a driving range of over 300 miles while fulfilling cost, safety, and performance criteria.

     

    Hydrogen storage is a critical enabler of the growth of hydrogen and fuel cell technologies in applications such as fixed power, portable power, and mobility.

     

    Hydrogen has the highest energy density per mass of any fuel; yet, because of its low ambient temperature density, it has a low energy density per unit volume, necessitating the development of new storage technologies with the potential for higher energy density.

     

    infographic: Automotive Hydrogen Storage Tank Market, Automotive Hydrogen Storage Tank Market Size, Automotive Hydrogen Storage Tank Market Trends, Automotive Hydrogen Storage Tank Market Forecast, Automotive Hydrogen Storage Tank Market Risks, Automotive Hydrogen Storage Tank Market Report, Automotive Hydrogen Storage Tank Market Share

     

    Hydrogen can be technically held as a gas or a liquid. High-pressure tanks (350–700 bar [5,000–10,000 psi] tank pressure) are often required for storing hydrogen as a gas. Because the boiling point of hydrogen at one atmospheric pressure is 252.8°C, storing it as a liquid necessitates cryogenic temperatures. Hydrogen can also be stored on solid surfaces (through adsorption) or inside solids (by absorption).

     

    High density hydrogen storage is a difficulty for fixed and portable applications, and it continues to be a major barrier for vehicle applications. The current storage methods usually need large-volume devices that store hydrogen in gaseous form. This is less of a problem in industrial applications, where the volume of compressed gas tanks is less important.

     

    To know more about Global Hydrogen Fuel Cell Vehicle Market, read our report

     

    AUTOMOTIVE HYDROGEN STORAGE TANK MARKET DEVELOPMENTS AND INNOVATIONS

    S No Overview of Development Development Detailing Region of Development Possible Future Outcomes
    1 Faurecia to supply CFRP tanks and hydrogen storage systems for Stellantis light commercial vehicles Stellantis (Amsterdam, Netherlands), the multinational automotive manufacturer formed by the 2021 merger of Fiat Chrysler Automobiles and French company Groupe PSA, and composite hydrogen storage tank technology leader Faurecia (Nanterre, France) have collaborated to equip Stellantis’ new zero-emission family of light commercial vehicles with hydrogen storage systems, as well as fuel cell stacks through Symbio, Faurecia’s joint venture with Michelin. Global Scale This would enhance better Technologies and production

     

     

    AUTOMOTIVE HYDROGEN STORAGE TANK MARKET DYNAMICS

    However, fuel-cell automobiles require enough hydrogen to provide a driving experience of further than 300 miles, and also the ability to recharge the vehicle quickly and economically.

     

    While there are numerous light-duty hydrogen fuel cell electric vehicles (FCEVs) on the market with this range, these vehicles will depend on compressed gas inbuilt storage via large-volume, elevated nanocomposite containers. Large storage volumes may be less of an issue for larger vehicles but ensuring adequate hydrogen storage across all light-duty platforms stays a worry.

     

    Hydrogen-powered vehicles are similar to electric vehicles. They have electric motors that move the wheels in the same way as an electric automobile does, but the distinction is in the batteries.

     

    Electric power is stored in a typical battery in an electric car, however in a hydrogen automobile, the electricity is arranged in the form of hydrogen and transformed into electricity. Currently, the cost of automotive storage tanks is too expensive, limiting the utilisation of these vehicles. A 5-kg tank for a car costs roughly USD 4,000-4,500, which is a significant cost boost to the overall cost of the vehicle.

     

    Hydrogen-powered automobiles are more popular in nations such as South Korea and Japan, where their individual governments have provided subsidies for these vehicles as well as financing for the required infrastructure.

     

    Furthermore, in the United States, the state of California offers incentives for the usage of fuel-cell-powered automobiles. Although hydrogen-powered vehicles may be a green solution in the current world, experts think that hydrogen must be created from a noble gas source, resulting in the usage of fossil fuels, whilst electric cars depend on battery power and are thus greener than hydrogen cars.

     

    infographic: Automotive Hydrogen Storage Tank Market, Automotive Hydrogen Storage Tank Market Size, Automotive Hydrogen Storage Tank Market Trends, Automotive Hydrogen Storage Tank Market Forecast, Automotive Hydrogen Storage Tank Market Risks, Automotive Hydrogen Storage Tank Market Report, Automotive Hydrogen Storage Tank Market Share

     

    AUTOMOTIVE HYDROGEN STORAGE TANK MARKET SEGMENTATION

    The Global Automotive Hydrogen Storage Tank Market can be segmented into following categories for further analysis.

     

    Automotive Hydrogen Storage Tank Market By Type

    • Tow Vehicle
    • Unit Load Carrier
    • Pallet Truck
    • Forklift Truck
    • Hybrid Vehicles
    • Others

     

    Automotive Hydrogen Storage Tank Market By Vehicle Classification Type

    • Passenger Vehicles
    • Light Commercial Vehicles
    • Heavy Commercial Vehicles

     

    Automotive Hydrogen Storage Tank Market By Technology Focus Type

    • Metal Storage Tank
    • Carbon fibre Storage Tank
    • Glass fibre Storage Tank

     

    Automotive Hydrogen Storage Tank Market By Technological Usage Type

    • IC Engine Usage
    • Hybrid Propulsion Engine Usage

     

    Automotive Hydrogen Storage Tank Market By Regional Classification

    • Asia Pacific Region – APAC
    • Middle East and Gulf Region
    • Africa Region
    • North America Region
    • Europe Region
    • Latin America and Caribbean Region

     

    AUTOMOTIVE HYDROGEN STORAGE TANK MARKET SIZE AND FORECAST

     

    The global hydrogen storage tank  market accounted for $XX Billion in 2023 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2024 to 2030.

     

    Hydrogen-powered vehicles are similar to electric vehicles. They have electric motors that move the wheels in the same way as an electric automobile does, but the distinction is in the batteries.

     

    Electric power is stored in a typical battery in an electric car, however in a hydrogen automobile, the electricity is arranged in the form of hydrogen and transformed into electricity. Currently, the cost of automotive storage tanks is too expensive, limiting the utilisation of these vehicles.

     

    Hydrogen-powered automobiles are more popular in nations such as South Korea and Japan, where their individual governments have provided subsidies for these vehicles as well as financing for the required infrastructure.

     

    Furthermore, in the United States, the state of California offers incentives for the usage of fuel-cell-powered automobiles. Although hydrogen-powered vehicles may be a green solution in the current world, experts think that hydrogen must be created from a noble gas source, resulting in the usage of fossil fuels, whilst electric cars depend on battery power and are thus greener than hydrogen cars.

     

     Linde, a leading industrial gas company, and BMW Group, a leading automaker, have announced a partnership to develop and produce hydrogen storage tanks for fuel cell electric vehicles (FCEVs). The partnership is aimed at developing new hydrogen storage tank technologies that are more efficient, cost-effective, and safer.

     

    Air Liquide, another leading industrial gas company, has announced a €150 million investment in hydrogen storage tank production. The investment will be used to expand Air Liquide’s existing hydrogen storage tank production capacity and to develop new hydrogen storage tank technologies.

     

    AUTOMOTIVE HYDROGEN STORAGE TANK MARKET TRENDS

    Hydrogen contains roughly three times the energy content of gasoline in terms of mass—120 MJ/kg for hydrogen against 44 MJ/kg for gasoline. However, on a volume basis, the situation is flipped; liquid hydrogen has a density of 8 MJ/L, whereas gasoline has a density of 32 MJ/L, as seen in the picture contrasting power density of fuels based on lower heating values.

     

    To achieve the driving range requirements for the whole spectrum of light-duty vehicle platforms, onboard hydrogen storage capacity of 5–13 kg hydrogen will be required.

     

    Car manufacturers often install two or three gas storage facilities with an overall capacity of around 150 litres between front and rear suspension. Since they are filled to a pressure of up to 875 bar, these tanks must fulfil extremely stringent safety standards.

     

    This closely correlates to the pressure at the bottom of the water in the Mariana Trench in the Pacific Ocean, which, at around 11,000 metres, is the world’s deepest point. Until date, the tanks have been less than one metre long and comprised an inner plastic container, the liner, that must be gastight in order to hold hydrogen.

     

    These are wrapped in kilometres of strands, which are made up of hundreds upon thousands of carbon filaments that are only a few thousandths of a millimetre thick and provide the tank with its strength. Carbon fibers are a critical component in the manufacture of storage tanks, accounting for around one-third of the expenditures.

     

    The new prototype should be a tenth of the cost of manufacturing and save up to 15% in weight without sacrificing safety.

     

    AUTOMOTIVE HYDROGEN STORAGE TANK MARKET RECENT TECHNOLOGICAL TRENDS

    Hydrogen contains roughly three times the energy content of gasoline in terms of mass—120 MJ/kg for hydrogen against 44 MJ/kg for gasoline. However, on a volume basis, the situation is flipped; liquid hydrogen has a density of 8 MJ/L, whereas gasoline has a density of 32 MJ/L, as seen in the picture contrasting power density of fuels based on lower heating values.

     

    To achieve the driving range requirements for the whole spectrum of light-duty vehicle platforms, onboard hydrogen storage capacity of 5–13 kg hydrogen will be required.

     

    Car manufacturers often install two or three gas storage facilities with an overall capacity of around 150 litres between front and rear suspension. Since they are filled to a pressure of up to 875 bar, these tanks must fulfil extremely stringent safety standards.

     

    This closely correlates to the pressure at the bottom of the water in the Mariana Trench in the Pacific Ocean, which, at around 11,000 metres, is the world’s deepest point. Until date, the tanks have been less than one metre long and comprised an inner plastic container, the liner, that must be gastight in order to hold hydrogen.

     

    These are wrapped in kilometres of strands, which are made up of hundreds upon thousands of carbon filaments that are only a few thousandths of a millimetre thick and provide the tank with its strength. Carbon fibers are a critical component in the manufacture of storage tanks, accounting for around one-third of the expenditures.

     

    The new prototype should be a tenth of the cost of manufacturing and save up to 15% in weight without sacrificing safety.

     

    infographic: Automotive Hydrogen Storage Tank Market, Automotive Hydrogen Storage Tank Market Size, Automotive Hydrogen Storage Tank Market Trends, Automotive Hydrogen Storage Tank Market Forecast, Automotive Hydrogen Storage Tank Market Risks, Automotive Hydrogen Storage Tank Market Report, Automotive Hydrogen Storage Tank Market Share

     

    • Worthington Cylinders has developed a new hydrogen storage tank that is designed for use in heavy-duty vehicles. The tank is made of a high-strength steel alloy and can withstand high pressures.
    • Luxfer Gas Cylinders has developed a new hydrogen storage tank that is designed for use in passenger vehicles. The tank is made of aluminum and is lightweight and durable.
    • Hexagon Composites has developed a new hydrogen storage tank that is designed for use in buses and other commercial vehicles. The tank is made of a composite material and is strong and lightweight.
    • Use of carbon fiber and other lightweight materials: Carbon fiber and other lightweight materials are increasingly being used in hydrogen storage tanks to reduce their weight and improve their performance. This can help to improve the range and efficiency of fuel cell electric vehicles (FCEVs).
    • Development of new hydrogen storage tank designs: New hydrogen storage tank designs are being developed that are more compact and efficient. This can help to reduce the size and weight of FCEVs, which can also improve their range and performance.
    • Use of 3D printing: 3D printing is being used to manufacture hydrogen storage tanks with complex geometries that would not be possible using traditional manufacturing methods. This can help to improve the strength and durability of hydrogen storage tanks.
    • Development of new hydrogen storage materials: Researchers are developing new hydrogen storage materials that can store more hydrogen at lower pressures and temperatures. This could lead to the development of smaller and lighter hydrogen storage tanks for FCEVs.

     

    AUTOMOTIVE HYDROGEN STORAGE TANK MARKET COMPETITIVE LANDSCAPE

    Every hydrogen tank must also demonstrate its ability to endure external mechanical loads, such as those experienced in a rear-end accident. No gas may escape from the storage tanks in these instances as well.

     

    Another advantage of this fuel is that hydrogen may be extensively compressed to conserve space, resulting in one kilogramme of gas containing about three times the energy of one kilogramme of crude oil. Hydrogen-powered automobiles on the market now have ranges of roughly 500 kilometres.

     

    Worthington Industries is involved in innovation of latest technological integrations within the hydrogen storage tank requirements in the market. Type III hydrogen composite tanks have an aluminium liner that is entirely covered in epoxy resin-coated, aerospace-grade carbon fibre.

     

    The pressures in hydrogen cylinders vary from 4,500 to 10,000 psi (310 to 690 bar). The liner is responsible for transferring heat to the pressure relief devices (PRDs). In heat, the lining does not easily degrade. As the resin burns away, the liner retains the composite fibers in place. During an impact event, the hard metal lining supports the composite and avoids or reduces composite bending and breaking.

     

    Luxfer Cylinders is part of the Luxfer Group which is also preforming varied levels of innovations in the market towards better development of cylinder technologies and storage requirements. G-Stor Pro cylinders, which have been rigorously tested to meet applicable worldwide design requirements and regulations, are utilized in a wide range of applications across the world, including transit buses, light, medium, and heavy-duty trucks, garbage vehicles, and bulk gas transportation modules.

     

    The G-Stor Pro cylinders are the greatest, lightest-weight Type 3 alternate fuels cylinders on the market. Since they are 66 percent lightweight than Type 1 all-steel cylinders and up to seven percent lighter than other composite cylinders in the NGV industry, the Luxfer cylinders provide fleet operators with significantly improved fuel economy, increased range, and a significant decrease in vehicular maintenance fees due to lessened wear on vehicles.

     

     

    THIS REPORT WILL ANSWER FOLLOWING QUESTIONS

    1. What are the key drivers of the automotive hydrogen storage tank market?
    2. What are the key challenges facing the automotive hydrogen storage tank market?
    3. What are the key trends in the automotive hydrogen storage tank market?
    4. What are the key investment opportunities in the automotive hydrogen storage tank market?
    5. What are the top companies in the automotive hydrogen storage tank market?
    6. What is the outlook for the automotive hydrogen storage tank market?
    7. What are the key government regulations impacting the automotive hydrogen storage tank market?
    8. What are the key factors to consider when choosing an automotive hydrogen storage tank?
    9. What are the key challenges and opportunities for automotive hydrogen storage tank manufacturers in emerging markets?
    10.   What is the market size for Automotive Hydrogen Storage Tank, in 2022 and how the growth curve looks like till 2030?
    11. What are the different types of materials used in automotive hydrogen storage tanks?
    12. What are the safety considerations associated with automotive hydrogen storage tanks?
    13. What are the cost drivers for automotive hydrogen storage tanks?
    14. What are the durability and lifespan of automotive hydrogen storage tanks?
    15. What are the best practices for the maintenance and inspection of automotive hydrogen storage tanks?
    16. What are the potential failure modes of automotive hydrogen storage tanks and how can they be mitigated?
    Sl no Topic
    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in the Industry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2024-2030
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2024-2030
    19 Market Segmentation, Dynamics and Forecast by Application, 2024-2030
    20 Market Segmentation, Dynamics and Forecast by End use, 2024-2030
    21 Product installation rate by OEM, 2024
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2024
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop