Card edge connectors are among the traditional connector types that are frequently utilised in the data and communication sector.
These connectors, which have a single female connector affixed to the edge of a PCB, are renowned for their ability to save both money and space.
Card edge connector performance and dependability are governed by standards like PCIe.
Amphenol offers a broad selection of card edge solutions that enable varied applications, from conventional devices to high-speed and high-power variations.
As a surface mount connector, Clipzin permits quick, simple connection and disengagement of sub modules while the retention clip ensures that nothing moves loose while in operation.
Due to its reliability in mass production applications as well as its suitability for the development environment, Clipzin is the best solution. The Clipzin connector, mounted to the host PCB and praised as a contemporary version of the card-edge connector, connects to the PCB directly by using castellated pads along the edges.
These connectors, which similarly have 0.8mm pitch and 20-140 contacts (in increments of 20), are available with a variety of PCB hold-down configurations that provide various alternatives for space savings or greater robustness.
In contrast to a two-part connector system, where a second connector may negatively affect the transmission, the card edge connector offers a smooth path for the signal. These connectors may deliver a high data rate with a compact footprint and higher current due to the smooth channel they provide.
The key features that set apart the products in this portfolio are their current ratings, which range from 5.2A/pitch (5.2 A/2.54 mm pitch) to 46A/pitch (15 A/2.54 mm), and their power density, which can sustain up to 3,400 W. With careful consideration of markets and customer requests, TE has expanded its array of card edge power connectors.
To address various power supply units and riser cards required from various end applications in general and high-end markets, it may provide a safer, adjustable, high-current, and high-density power connection that complies with the CRPS interface.
A New Series of Vertical, Dual-Row, Top-Entry Card-Edge Connectors is Introduced by KYOCERA AVX.
The new 9159-650 Series, which is based on the 00-9159 Series, adds twice as many tested-dependable, gold-plated BeCu compression contacts in roughly the same form factor and increases the current rating to 2.5A per contact to provide exceptional reliability and high signal integrity performance in demanding automotive, industrial, and lighting applications.
Compression contact technology developed by AVX has been demonstrated to provide high-reliability, high-signal-integrity performance in demanding, harsh environment applications.
AVX is proud to not only provide one of the most comprehensive standard lines of horizontal and vertical card-edge connector solutions in the market, but also to continuously innovate in order to fill market gaps.
The 00-9159 Series vertical, single-row, top-entry card-edge connectors have been field-proven in tough automotive, industrial, and lighting applications since their market introduction.
The new 9159-650 Series vertical, dual-row, top-entry card-edge connectors are available with four to 12 contacts rated for a full 2.5A each and arranged in a staggered, dual-row configuration that allows for twice the number of contact positions in a relatively small form factor.
The Global Card edge connector market accounted for $XX Billion in 2022 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2023 to 2030.
© Copyright 2017-2023. Mobility Foresights. All Rights Reserved.