Multi User License - $2,999
The engine powering the steel rod cutter has a speed of 1450 RPM. It can effortlessly cut through many steel rods. There are various restrictions on the quantity and size of rods that each machine variant can cut. Ideal for cutting the edges of threaded rods and rebars is a cordless steel rod cutter.
Rebars can be cut at an angle of 3.5 mm from the corner of the lattice in both the vertical and horizontal directions; threaded rods can also be cut at an angle of 3.5 mm from the ground or surface.
Nuts can be inserted with less risk of damaging the threaded rods because burrs don’t need to be removed. For maximum performance, ADT (Automatic Torque Drive Technology) modifies speed and torque while in use.
The Global Cordless Steel Rod Cutter market accounted for $XX Billion in 2021 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2022 to 2030.
By incorporating a shroud into a standard grinder design, the Makita Cordless Steel Rod Flush Cutter enables you to cut steel rod and rebar as near to the surface as 1/8″.
Its brushless motor is powered by an 18V battery. The blade configuration of the Makita XCS06 has been upgraded while remaining nearly identical to the XCS02.
The tool’s ability to cut through threaded rod and rebar almost flush to your surface is a major thing. The Makita Steel Rod Flush Cutter can cut up to 1/8′′ flush thanks to the design of the shroud.
The cutter has a 4-5/16′′ blade with a carbide tip that spins at 2,200 RPM with barely any sparks. It produces colder slices that you can touch with your bare hands and is significantly slower than a traditional angle grinder.
Additionally, the blade creates clean, burr-free cuts.To aid in making an equal cut, the Makita Steel Rod Flush Cutter incorporates a stopper that holds rebar or threaded rod at a 90° angle.
© Copyright 2017-2022. Mobility Foresights. All Rights Reserved.