Global Electric Vehicle Coatings Market 2024-2030

    In Stock

    ELECTRIC VEHICLE COATINGS MARKET

     

    INTRODUCTION TO ELECTRIC VEHICLE COATINGS MARKET

    From the standpoint of membrane technology, the coating is a piece of material put onto such a substrate to improve the physical qualities for wear and corrosion protection. Service encounter, life expectancy, substrates ultimate convenience, element form and volume, and cost are all factors to consider when selecting a coating.

     

    Coating techniques for spraying numerous different materials at widths spanning from several micrometres to a few millimetres are available. The many kinds of coverings can be classified in a variety of ways.

     

    One frequent strategy is dependent on how the coating material is applied to the surface of the substrate. Atomic deposition, particle deposition, and bulk coating or cladding are all examples of this. Automated vehicles communicate with one another and with their environment in the vast majority of instances.

     

    The automobiles employ LIDAR (Light Detection and Ranging), a laser-like technology that sends signals that bounce off some other surfaces and transmit illumination towards the receiver. Based on information gathered, this technology then creates a map of the surrounding region.

     

    infographic: Electric Vehicle Coatings Market, Electric Vehicle Coatings Market Size, Electric Vehicle Coatings Market Trends, Electric Vehicle Coatings Market Forecast, Electric Vehicle Coatings Market Risks, Electric Vehicle Coatings Market Report, Electric Vehicle Coatings Market Share

    It only works if the LIDAR signals reach their destination and return to the vehicle’s sensors. They must be extremely visible in the rain or snow. Coatings should be easily cleanable or have self-shedding surfaces to prevent ice build-up.

     

    IoT-enabled vehicles will also feature hundreds of small antennas to let them interact with their environment. Working in a rapidly changing industry necessitates the capacity to respond quickly to the requirements of its consumers.

     

    In many situations, industry-standard EV and autonomous vehicle (AV) rules do not yet exist, making research and development difficult.

     

    ELECTRIC VEHICLE COATINGS MARKET DEVELOPMENTS AND INNOVATIONS

     

    S No Overview of Development Development Detailing Region of Development Possible Future Outcomes
    1 Axalta to Showcase EV Battery Coatings Axalta (Glen Mills, PA) will unveil a portfolio of coatings for electric vehicle (EV) batteries and motors at The Battery Show North America Global Scale This would enhance better Technologies and production

     

    ELECTRIC VEHICLE COATINGS MARKET DYNAMICS

    The COVID-19 effect has significantly affected the supply chain for the whole automotive ecosystem since time has elapsed. This is what has caused a disturbance in automotive parts shipments by halting production facilities throughout the world.

     

    This situation is projected to have an impact on the automotive conformal coatings industry, as market development is primarily tied to automobile manufacturing. Stringent emission standards throughout the world have prompted governments to place a greater emphasis on promoting and investing in BEVs.

     

    This is likely to create a favourable atmosphere for BEV sales and promote demand for the vehicles. Electric cars have a greater level of electronics implantation than regular vehicles, and rising BEV sales are likely to feed the need for conformal coatings to safeguard them.

     

    Regional development can be attributable to increased automobile manufacturing in nations such as China, Japan, and South Korea. Authorities around the Asia Pacific area have enacted tough safety and pollution standards, which are projected to enhance the use of car electronics.

     

    The increased need for novel energy storage applications in cars, grid-connected energy storage, and consumer electronics is likely to drive the demand for more sustainability battery packs, consequently propelling the battery coatings industry forward.

     

    Massive economic expansion and thriving electronics and electric car sectors in several Asia Pacific nations, such as China, Japan, and South Korea, are driving the industry’s rapid rise. Autonomous vehicles have a greater level of electronics integration over regular automobiles, and demand for electricity is rising.

     

    ELECTRIC VEHICLE COATINGS MARKET SEGMENTATION

    The Global Electric Vehicles Coatings Market can be segmented into following categories for further analysis.

    Electric Vehicle Coatings Market By Application

    • Entry Level Vehicles
    • Mid-Level Vehicles
    • Luxury Class Vehicles

     

    Electric Vehicle Coatings Market By Product Type

    • ECU
    • PCB
    • Sensors
    • Battery Casings
    • LED Systems
    • Infotainment Systems

     

    Electric Vehicle Coatings Market By Technology Focus Type

    • Interior Technology
    • Exterior Technology

     

    Electric Vehicle Coatings Market By Architecture Type

    • Hybrid Propulsion Vehicle
    • BEV
    • PHEV

     

    Electric Vehicle Coatings Market By Regional Classification

    • Asia Pacific Region – APAC
    • Middle East and Gulf Region
    • Africa Region
    • North America Region
    • Europe Region
    • Latin America and Caribbean Region

     

    RECENT TECHNOLOGICAL TRENDS IN ELECTRIC VEHICLE COATINGS MARKET

    Quite an expansion in aluminium in car bodywork would disrupt the paint-curing procedure for coat primer and topcoat in automobile sector paint facilities.

     

    It would also have an impact on the furnaces used to cure sealing and warm waxes in hollow, and also the conditioning tunnels. Changes in the composition of electric car materials may also have an impact on pre-treatment, phosphating, and electrocoating operations.

     

    Various car body materials can alter the thermal environment of the baths, which seems to have their fluid temperature adjusted.

     

    Ceramic coating is a long-term protection choice for your automobile, thanks to improvements in technology. It may be thought of as a semi-permanent wax or sealer. The paint on an automobile is made up of multiple layers.

     

    The enamel of an automobile is composed of multiple layers: a metal/body layer, a priming layer, a base coat layer, as well as a topcoat overlay.

     

    The ceramics coatings can be applied on top of the smooth finish film, which really is responsible for the paint’s lustre and shine. A ceramic coding can survive for several years as opposed to about 6 weeks for such a waxed encoding.

     

    EV batteries could indeed generate a huge amount of heat, so it’s important that it’s distributed evenly throughout the assembly to provide general cooling and avoid localised excessive heat.

     

    This could also help with distribution of heat from neighbourhood trouble spots to warm drains when properly tightened to optimise temperature distribution here between different components.

     

    Using fasteners with thermally and electrically conductive coatings will help them last longer. Insulating coatings are used to prevent electricity from flowing in places this would not. This one has a minimal predictability of friction.

    NEW AQUISITION IN ELECTRIC VEHICLE COATINGS MARKET

     

    Axalta, a leading global supplier of liquid and powder coatings, announced today that it has reached an agreement to buy Anhui Shengran Insulating Materials Co. Ltd, a leading Chinese manufacturer of high-quality wire enamels used in consumer electronics, electric vehicles, and industrial applications. The financial details have not been revealed. The addition of Anhui Shengran to Axalta’s existing Energy Solutions portfolio will be extremely beneficial.

     

    The acquisition will bring new wire enamel products and capabilities to customers in a variety of industries, including automotive, renewable energy, and consumer electronics. Axalta’s expansion in the rapidly increasing Asian markets will be aided by the expanded production capacity. 

     

    Axalta’s Energy Solutions business offers a comprehensive portfolio of innovative and environmentally responsible insulating solutions for customers in new energy vehicles and other industrial markets, with three distinct product segments – wire enamels, impregnating resins, and electrical steel coatings. Axalta’s products assist clients meet sustainability goals and standards by increasing the efficiency of electric motors and extending the life of treated parts. Axalta is rapidly expanding its wire enamel product offers globally and in China by better using operating synergies, increasing R&D capacity, and diversifying its product line.

     

     

    ELECTRIC VEHICLE COATINGS MARKET COMPETITIVE LANDSCAPE

    The demand for consumer gadgets has grown significantly throughout the centuries. Coatings are in great demand due to rising disposable income and increased urbanisation.

     

    Because holographic coatings are widely used in consumer technology, the coatings industry is likely to increase rapidly. Technological developments in electric assembly, as well as ever-changing customer needs, are projected to provide chances for growth.

     

    So over centuries, the development of electric cars has grown dramatically. The introduction of electric cars as a viable alternative to gasoline-powered vehicles has resulted in a rise in sales.

     

    Speciality Coating Systems, which is part of the KISCO Company is a global scale developer of the coating is focused on the electric vehicles in the market. SCS Parylene conformal coatings comprise ultra-thin, pinhole-free polymeric coverings that offer a variety of high-value surface modification qualities, including outstanding humidity, chemicals, and dielectric resistance capabilities, temperature and UV durability, and dry-film flowability.

     

    The general term for components of a distinct polymer series is Parylene. These components (or variants of Parylene) each provide engineers with somewhat distinct coating qualities. The latest and most distinctive member of the family, ParyFree, substitutes one or more hydrogen atoms in the Parylene N dimer with non-halogenated substituents.

     

    When contrasted to certain other commonly produced Perylenes, this halogen-free form provides the superior barrier qualities of Parylene C as well as better electronic and structural properties. Parys Free maximises the crucial mix of barrier, electrical, and mechanical qualities to give effective resistance to

     

    3M is also a developer of the global scale coatings in the market wherein the technological integration has been uniform sectoral requirements. Electrical Resin 260 is a very well and commonly employed multipurpose epoxy powdered resin.

     

    It is indeed a one-part, eco-friendly coloured, quick heat-curing compound that is intended to deliver a persistent, durable, moisture and chemical resistant dielectric covering to a wide variety of substrates.

     

    Resin 260 is produced using a fusion mix technique, which ensures that each individual particle of powder includes all of the ingredients required to complete the cure and achieve the claimed performance characteristics.

     

    Resin 260 is sprayed to an item that has been heated to a temperature higher than that of the resin’s melting point. When the resin comes into touch with both the warmed coating substrate, it heats and streams to a regulated amount before curing and attaching to the substrate and coalescing into a smooth, continuous, essentially uniform, thick covering.

     

    It coats effectively on Smooth surfaces, edges, especially bright spots are all examples of solid surfaces and intersections of the EV components.

     

    ELECTRIC VEHICLE COATINGS MARKET COMPANIES PROFILED

     

    Sl no Topic
    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in theIndustry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2024-2030
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2024-2030
    19 Market Segmentation, Dynamics and Forecast by Application, 2024-2030
    20 Market Segmentation, Dynamics and Forecast by End use, 2024-2030
    21 Product installation rate by OEM, 2023
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2023
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop