Global EV Gigabit Ethernet PHY Market 2023-2030

    In Stock

    GLOBAL EV GIGABIT ETHERNET PHY MARKET

     

    INTRODUCTION

     The physical layer of the OSI network architecture is where the Ethernet PHY functions. It carries out the Ethernet’s physical layer implementation. Its function is to physically access the link for analogue signals. It is typically connected to a MAC chip in a microcontroller or similar device that handles the higher layer operations via a media-independent interface.

     

    A chip called the Ethernet PHY, which interfaces between the analogue domain of Ethernet’s line modulation and the digital domain of link-layer packet signalling, accomplishes the hardware transmit and receive function of Ethernet frames.

     

    MAC addressing is typically not handled by the PHY because the link layer is in charge of that. The network interface card, which may contain PHY, MAC, and other capabilities integrated into one chip or as separate chips, is where Wake-on-LAN and Boot ROM functionality is implemented.

     

    Fiber or two to four copper pairs are typical Ethernet connections for data transmission. However, a new interface known as Single Pair Ethernet is now available and can make use of just a single pair of copper wires while still communicating at the desired rates. The term “gigabit Ethernet” in computer networking refers to the transmission of Ethernet frames at a rate of one gigabit per second.

     

    The IEEE 8023ab standard specifies 1000BASE-T, the most widely used form. Due to its significant performance gain over Fast Ethernet, as well as its ability to support more devices, has supplanted Fast Ethernet in wired local networks.as well as the utilisation of inexpensive, widely accessible, and comparable to earlier standards cables and equipment.

     

    The OSI model’s physical layer operations must be implemented in a network interface controller by a PHY, which stands for “physical layer” and refers to an electrical circuit that is often implemented as an integrated circuit.

     

    A PHY attaches a link layer device to a physical medium, like copper cable or optical fibre. Physical coding sublayer and physical media dependent layer functionality are frequently present in PHY devices.

     

    Moreover, the suffix -PHY can be used to create a short name that refers to a particular physical layer protocol, such as M-PHY. A PHY chip is complemented with modular transceivers for fiber-optic communication, which together make up the PMD sublayer.

     

    GLOBAL EV GIGABIT ETHERNET PHY MARKET SIZE AND FORECAST

     

    infographic : EV Gigabit Ethernet PHY Market , EV Gigabit Ethernet PHY Market Size, EV Gigabit Ethernet PHY Market Trend, EV Gigabit Ethernet PHY Market Forecast, EV Gigabit Ethernet PHY Market Risks, EV Gigabit Ethernet PHY Market Report, EV Gigabit Ethernet PHY Market Share

     

    The Global EV Gigabit Ethernet PHY market accounted for $XX Billion in 2022 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2023 to 2030.

     

    NEW PRODUCT LAUNCH

    The mission performance of aircraft, military vehicles, and ground-based systems that rely on intelligence, information, and secure connectivity is supported by improved technology built to function under harsh temperatures and environmental conditions.

     

    The VSC8540/41ET Gigabit Ethernet PHY RMII / RGMII Transceiver, a Commercial Off-The-Shelf device improved for avionics and military applications, was launched by Microchip Technology Inc.

     

    The Gigabit Ethernet Physical Layer transceiver from Microchip is based on COTS technology used in other industries and has a military-grade, high-reliability plastic package that satisfies specifications for applications ranging from fighting vehicles to cockpit avionics and in-flight communication systems.

     

    Reduced Gigabit Media Independent Interface and GMII are features of the VSC8541ET Ethernet transceiver, which also offers RMII and MII Megabit interface. The transmitter operates between -55 and 125 degrees Celsius without latch-up immunity to air radiation impacts.

     

    Wafer and assembly lot full traceability, a description of testing, electrical parameters, and fault coverage, a qualification report, and a certificate of conformance are all included in the product specifications.

     

    Electric vehicles (EVs) are one of the technologies that Microchip Technology Inc., a leading developer of semiconductor solutions, enables to be smarter, safer, and more effective.

     

    The Gigabit Ethernet PHY product line, which enables high-speed communication across the different electronic systems and components in EVs, is one of its important offerings in this market.

     

    Each component in the Gigabit Ethernet PHY product range from Microchip Technology Inc. is created to specifically address the requirements of EV manufacturers and integrators.

     

    The KSZ9031, a fully-integrated, low-power Gigabit Ethernet transceiver that supports both copper and fiber connections, is one of the most well-liked parts in this range.

     

    The KSZ9031 is intended for use in high-performance automotive applications, allowing quick and dependable communication between the several electronic control units (ECUs) in the vehicle’s interior.

     

    The KSZ9031 is perfect for usage in EVs since it has a variety of cutting-edge capabilities. It may precisely synchronize data across several ECUs, for instance, by supporting the IEEE 1588 Precision Time Protocol (PTP).

     

    Advanced power management capabilities are also included, enabling low-power operation even in challenging vehicle situations. The KSZ9477, a seven-port Gigabit Ethernet switch with integrated PHYs, is a crucial part of Microchip Technology Inc.’s Gigabit Ethernet PHY product line.

     

    This part is intended to be used in more intricate EV systems where it facilitates smooth communication between several ECUs, sensors, and other electrical parts. The KSZ9477, like the KSZ9031, is excellent for usage in EVs thanks to a number of cutting-edge characteristics.

     

    These consist of support for cutting-edge security technologies like IEEE 802.1AE MACsec, which offers hardware-based network traffic encryption and decryption.

     

    Advanced Quality of Service (QoS) capabilities are also included, allowing for the prioritization of important data traffic, such as real-time sensor data.

     

    Advanced connection and communication in EVs are significantly facilitated by the Gigabit Ethernet PHY product line from Microchip Technology Inc.

     

    Its parts provide fast, dependable communication between the many electronic systems and parts of EVs, enhancing the effectiveness and efficiency of these cars’ functioning.

     

    The Gigabit Ethernet PHY product line from Microchip Technology Inc. is projected to play a bigger role in this industry in the years to come, given the ongoing expansion of the EV market.

     

    Gigabit Ethernet PHY components are one of the many products that Infineon Technologies AG, a top supplier of semiconductor solutions, offers for the electric vehicle (EV) industry. The AURIX TC3xx family is one of their most significant Gigabit Ethernet PHY devices for EVs.

     

    Advanced driver assistance systems (ADAS) and autonomous driving are two examples of high-performance automotive applications that the AURIX TC3xx range of Gigabit Ethernet PHY components are particularly made for.

     

    These parts are perfect for usage in EVs since they include a wide range of characteristics and capacities. High-speed data transfer capabilities are one of the distinguishing characteristics of the AURIX TC3xx family.

     

    High-bandwidth applications like real-time video and audio streaming require components that can support data transfer rates of up to 1Gbps, which are crucial for these applications.

     

    Additionally, these parts are created to deliver dependable and secure communication between the powertrain, ADAS systems, and other connected devices of an EV.

     

    The toughness and endurance of the AURIX TC3xx series are essential features as well. Extreme temperatures, high degrees of vibration, and electromagnetic interference are just a few of the challenging conditions that these components are made to function in.

     

    They are therefore ideal for usage in electric vehicles (EVs), whose performance is susceptible to a variety of environmental conditions.

     

    The AURIX TC3xx family also offers a variety of other qualities that make them perfect for usage in EVs, in addition to their high-speed data transfer and durability. These include high levels of security, support for numerous communication protocols, and minimal battery usage.

     

    COMPANY PROFILE

     

    THIS REPORT WILL ANSWER FOLLOWING QUESTIONS

    1. How many  EV Gigabit Ethernet PHY  are manufactured per annum globally? Who are the sub-component suppliers in different regions?
    2. Cost breakup of a Global  EV Gigabit Ethernet PHY  and key vendor selection criteria
    3. Where is the  EV Gigabit Ethernet PHY  manufactured? What is the average margin per unit?
    4. Market share of Global  EV Gigabit Ethernet PHY  market manufacturers and their upcoming products
    5. Cost advantage for OEMs who manufacture Global  EV Gigabit Ethernet PHY  in-house
    6. key predictions for next 5 years in Global  EV Gigabit Ethernet PHY  market
    7. Average B-2-B  EV Gigabit Ethernet PHY  market price in all segments
    8. Latest trends in  EV Gigabit Ethernet PHY  market, by every market segment
    9. The market size (both volume and value) of the  EV Gigabit Ethernet PHY  market in 2023-2030 and every year in between?
    10. Production breakup of  EV Gigabit Ethernet PHY  market, by suppliers and their OEM relationship

     

    Sl no Topic
    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in the Industry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2023-2030
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2023-2030
    19 Market Segmentation, Dynamics and Forecast by Application, 2023-2030
    20 Market Segmentation, Dynamics and Forecast by End use, 2023-2030
    21 Product installation rate by OEM, 2023
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2023
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop