By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
Simply referred to as “Moly,” molybdenum disulfide is used both separately as a dry lubricant and as an ingredient in lubricating greases.
Without the use of an oil medium, dry lubricants minimize friction between two sliding surfaces. Grease has typically employed molybdenum disulfide to lubricate bits.
Moly greases are typically employed in processes where metal surfaces are sliding against one another under high pressure.
These include roller bearings that are subjected to shock loading and very severe loads. In slow or oscillating motion that is employed in universal and CV joints, moly greases are also advised.
The global molybdenum disulfide grease market accounted for $XX Billion in 2021 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2023 to 2030.
Molybdenum disulfide grease is used in end-use industries like aerospace, automobiles, and chemicals, among others. Over the projection period, demand for molybdenum disulfide grease will rise as a result of the expansion of various end-use industries.
From a macroeconomic standpoint, as the development of the end-use industries for molybdenum disulfide primarily depends upon these factors, global economic growth and growth in industrial value added will also have a significant impact on the market growth throughout the projection period.
However, the availability of substitutes like tungsten disulfide will impede the market’s expansion for molybdenum disulfide.
Molybdenum disulfide has qualities like being useless in low-temperature applications. Additionally, the availability of inferior goods from regional rivals may limit the growth of the worldwide molybdenum disulfide grease market over the forecast period.
NEW PRODUCT LAUNCH
Molybdenum disulfide was launched by Climax in a spherical iteration. Spherical molybdenum disulfide (SMD), a type of molybdenum disulfide (MoS2) that can be sprayed into a sphere, has been created by the business.
SMD can be used in place of normal MoS2 as an ingredient in lubricating oils, greases, and other materials. Epshteyn claimed that the new product performs admirably under situations of high pressure and that, despite not being proved to significantly reduce friction, it did significantly reduce wear.
MoS2 typically appears as a powder and has the shape of a hexagonal or rhombohedral crystal. It took four to five years to develop the spherical version.The slurry of superfine MoS2 is spray dried to create SMD.
Initial experiments have demonstrated that it is possible to create a homogenous mix of MoS2, in which both the blend and the particles themselves are homogeneous, indicating that the sulphur is evenly distributed.
It is possible to set up the formulation and granulation settings to change the particle size, shape, and hardness in order to achieve the perfect particle size and shape.
Molybdenum disulfide is a naturally occurring substance that is widely available, and Colorado State University researchers are proposing to use it to create solar cells.
The researchers performed a series of tests demonstrating that extremely thin films of molybdenum disulfide display exceptional charge carrier qualities that could significantly advance solar technology in the future using a combination of photoelectrochemical and spectroscopic methods.
Based on preliminary information about molybdenum sulphide’s ability to absorb light even when just three atoms thick, their group got interested in it as a potential alternative solar material.
Their experience in solar energy conversion using nanoscale materials and Krummel’s knowledge in ultrafast laser spectroscopy were both utilised in the partnership in order to better understand the structure and behaviour of various materials.
They built a photoelectrochemical cell from a single atomic layer of molybdenum sulphide, and then utilised the pump-probe laser to monitor the cooling of the electrons as they passed through the material. The light-to-energy conversion they discovered was incredibly effective.
More significantly, the laser spectroscopy tests allowed them to demonstrate the reasons why this effective conversion was achievable.
The energy from these heated carriers was discovered to be instantaneously transformed into photocurrent in their photoelectrochemical cell, as opposed to being lost as heat in traditional silicon solar cells, giving it a benefit over those.
This research lays the door for the development of reactor designs that contain these nanoscale components for the efficient and extensive production of hydrogen.
