Global Packaged Air Conditioners Market 2022-2027

    In Stock

    GLOBAL PACKAGED AIR CONDITIONERS MARKET

     

    INTRODUCTION

    Modern packaged air conditioning units contain all of the key elements of the air conditioning systems in a single case, similar to a conventional AC.

     

    As a result, the compressors, condenser unit, air handler, as well as air purifier are all enclosed in one case and built just at manufacturer. Window and split air conditioning units are often utilised for minor climate control capabilities ranging from 1 to 5 tonnes. Centralized air conditioning techniques are installed wherever cooling demands exceed 20 tonnes. 

     

    Between any of these two extreme values, packaged cooling towers are employed to provide cooling capacity. Packaged air conditioners come in fixed estimated capabilities of 3, 5, 7, 10, and 15 tonnes.

     

    infographic: Packaged Air Conditioners Market, Packaged Air Conditioners Market Size, Packaged Air Conditioners Market Trends, Packaged Air Conditioners Market Forecast, Packaged Air Conditioners Market Risks, Packaged Air Conditioners Market Report, Packaged Air Conditioners Market Share

     

    These devices are typically seen in areas such as restaurants and phone booths, exchanges, residences, small halls, and so on Packaged air conditioners are categorised into two varieties based on the type of cooling method utilised in these system applications: those with water – cooling condensers and those with air – cooling condensers.

     

    This same compressor is allowed to cool by moisture in these plastic wrapped ambient air. 

     

    The condensation is made of shell and tube construction, with refrigeration flowing anywhere along inner pipe and chilled water running along the pipe wall. To keep the ventilation system running, water must be continually supplied within those installations. This shell – and – tube condensation has a minimalistic size and is housed in a single casing also with compressors, expansion device, and air handling systems (along with the chilling).

     

    GLOBAL PACKAGED AIR CONDITIONERS MARKET DYNAMICS

    Windshield air conditioning units are larger versions of packaged air conditioning systems. It is made up of an interconnecting circuit and an evaporative fan motors to guarantee that the compressor only begins while the blower is operating.

     

    The capacity of the packed air conditioner ranges from 3 to 15 tonnes. The COVID-19 epidemic has caused supply chains to be shut down and constrained in nations throughout the world, affecting the development of the compact air – conditioning business. 

     

    This has impacted the expansion of the packaged air conditioners sector . in recent quarters and is projected to continue in 2021. COVID-19 has already had an impact on packaged air conditioner revenues in the first half of 2021 and therefore is likely to significantly impede market growth throughout the year.

     

    In addition, the possible influence of the shutdown is no longer an option, and a corporate accounting revival is totally based on its cash reserves. For example, a number of market participants have suspended manufacturing for many weeks in order to save costs. 

     

    While few businesses have fired off employees in order to weather the COVID-19 medical problem. Additionally, construction business expansion in places such as the Middle East and the Americas is predicted to be amongst the industry’s factors driving. Furthermore, the development in urbanization and indeed the number of service structures in various parts of the country boost market expansion.

     

    Numerous industrial heavyweights, including Carrier, Johnson, and Daikin, are making substantial contributions to industry growth. The increasing use of R32 refrigerant in air conditioning systems, which itself is economical and may cut power consumption, is expected to create a profitable market potential. In addition to the expensive cost and implementation, this industry’s expansion is limited.

     

    GLOBAL PACKAGED AIR CONDITIONERS MARKET SEGMENTATION

     

    The Global Packaged Air Conditioners Market can be segmented into following categories for further analysis.

     

    By Application

    • Water Cooled
    • Air Cooled

     

    By Product Type

    • Single split
    • Multi- split

     

    By Technology Type 

    • Inverter
    • Non-Inverter

     

    By Operations Type

    • OEM
    • Aftermarket

     

    By Architecture Type

    • 1 Tons Capacity
    • 1.5 Tons Capacity
    • 2 to 3 Tons Capacity
    • Greater than 3 Tons Capacity

     

    By Regional Classification

    • Asia Pacific Region – APAC
    • Middle East and Gulf Region 
    • Africa Region 
    • North America Region
    • Europe Region
    • Latin America and Caribbean Region

     

    RECENT MARKET TECHNOLOGICAL TRENDS IN GLOBAL PACKAGED AIR CONDITIONERS MARKET

    Integrated cooling towers have been used to treat outputs ranging from 5 to 20 tonnes. Splitting as well as windows HVAC systems are utilised for single air-cooling capabilities of approximately to 5 tonnes.

     

    Integrated air conditioning units are often employed when cooling demand exceed 20 tonnes. Package HVAC systems are often used in eateries, apartment flats, festival halls, office buildings, and other similar establishments. 

     

    These cooling towers are referred to as package air conditioners because they contain all of the critical ingredients of an air conditioning unit inside a single container. At the manufacture or production facility, components including the air handler, air filter, compressors, condenser unit, and so forth are all integrated inside a single casing.

     

    The single-split bundle was created using hyper-wave inverter technology-based air conditioning units are propelling the industry forward. Unlike traditional inverter technology, such positive benefit in energy conservation. Packaged air conditioning unit motors are built of metals also including neodymium, which has low strong magnetic deformation and great efficiency. 

     

    Manufacturers favour high-efficiency package air conditioning units because they save money on servicing. The provision of extensive warranty periods, as well as the possibility of extended warranty, is also helping to drive the expansion of the packaged air – conditioning industry.

     

    The health issues connected with packaged climate control, including as respiratory difficulties, inability to deal with heat, compounding the impact of chronic disease, dry skin, and persistent exhaustion, are limiting market expansion.

     

    GLOBAL PACKAGED AIR CONDITIONERS MARKET RECENT LAUNCH

    NORDYNE and Nortek Global HVAC introduced many new packaged products with all-aluminium construction. Micro-Channel coils are used in NORDYNE packaged systems for lighter weight, smaller size, improved durability, and increased reliability in corrosive situations, such as the P7RD Packaged Air Conditioner.

     

    For ease of installation, the 13-SEER P7RD single-packaged air conditioning system has a tiny footprint. Balls, lawnmowers, hail, and other objects might damage the coil, so it’s protected with an Earth-friendly epoxy-coated wire coil guard and a never-rust mesh hail guard.

     

    With the launch of the next generation of YORK Residential Package Equipment, Johnson Controls, the global pioneer in smart and sustainable buildings, is delivering higher efficiency in the residential and light commercial markets.

     

    With electric or gas heating, the entire AC and heat pump range is available in both 14 SEER and ENERGY STAR certified 16 SEER efficiency, giving affordable performance and reduced energy use when compared to previous versions.

     

    CIAT has launched a new line of VectiosPower rooftop air conditioning units that run on R-454B refrigerant, providing clients with the best possible application option. R-454B’s overall carbon footprint is more than 80% lower than HFC R-410A, the refrigerant it replaces, with a GWP of 466.

     

    VectiosPower with R-454B offers all of the previous generation’s space-saving and low-noise benefits while employing the best refrigerant for rooftop applications, lowering environmental impact and achieving higher efficiencies and reduced running costs. Advanced indoor air quality technologies, such as high-efficiency filtration, fine air flow management, and optional CO2 sensors, are also available.

     

    New small, light-weight outdoor units are being introduced by MHI Thermal Systems, Ltd., a group company of Mitsubishi Heavy Industries, Ltd. (MHI), for the 4, 5, and 6 horsepower (HP) models of its “HyperInverter” line of high-efficiency packaged air conditioners.

     

    Additionally, the company will start marketing five new indoor units for both its “EXCEEDHYPER” series of ultra-efficient packaged air conditioners and the HyperInverter series that are equipped with a motion sensor function that detects the amount of ambient human movement and automatically adjusts the room temperature in accordance.

     

    The new products are optimised for installation and construction simplicity while also enhancing operating performance, ambient comfort, and energy efficiency.

     

    COMPETITIVE LANDSCAPE

    Packaged air conditioners account for a very modest proportion of the worldwide air conditioners market, but they are in great demand in the United States and China, and they have a high prospective demand in numerous established and emerging nations. Their demand is predicted to increase significantly over the next two decades, as the number of residential and commercial building projects increases internationally, and numerous nations see fast urban and economic expansion.

     

    The rise in house development in important nations and regions such as China, the United States, Saudi Arabia, and India, as well as the rise in demand for luxury items owing to rising living standards, are the primary drivers driving market expansion.

     

    Daikin Industries is growing towards elevated performance requirements in the global market of operability. Its use of modern inverter and heat pump technology improves efficiency while lowering energy consumption and prices.

     

    Daikin packaged air conditioners work with ducts to provide air solely to the zones and regions that require it. This inverters regulates the frequency of the power source to control the rotation speed of a motor.

     

    Temperatures is stabilised by inverters by regulating compressor operation based on demand to minimize waste and also save power. Even adding an inverter to the fan motors of the interior and outdoor units gives more accurate control and helps to save power.

     

    Samsung is part of the much-developed market of the global operations of Air conditioning integration usage within automotive application.

     

    It makes use of the amazingly effective Electronic Inverter technology. It maintains the correct temperature with minimum variation and consumes less energy by automatically adjusting its speed. It also operates effectively, creates minimal disturbance, and seems to last considerably longer since it employs powerful magnets.

     

    The Durafin Ultra integration features an anti-corrosive coating of epoxy acrylic and a hydrophilic layer of acrylic resin that protects the Heat Exchanger from rust. Its outstanding corrosion behaviour was demonstrated in a Salt Spray Test (SST) for a period of 2,280 hours.

     

    COMPANIES PROFILED

     

    Sl no Topic
    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in the Industry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2022-2027
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2022-2027
    19 Market Segmentation, Dynamics and Forecast by Application, 2022-2027
    20 Market Segmentation, Dynamics and Forecast by End use, 2022-2027
    21 Product installation rate by OEM, 2022
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2022
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop