SYNCHRONOUS INDUCTION MOTOR MARKET

INTRODUCTION

A synchronous motor has a rotor that typically rotates at the same rate as the machine's rotating field. The stator resembles an induction machine in that it has windings, often three-phase, that are arranged in slots around the inner periphery of a cylindrical iron frame.

A synchronous induction motor is a combination of both a synchronous motor and an induction motor. Synchronous induction motors can be employed in situations that call for high starting torque and steady speed. It benefits from both synchronous and induction motor advantages.

In contrast to induction motors, which can be started against full load torque, synchronous motors provide steady speed. 

Benefits of synchronous induction motor

• The gap is narrower than it is for a typical salient pole motor, the exciter used for a synchronous induction motor has a smaller capacity.
• The synchronous induction motor's rotor winding can serve as both the necessary excitation and damping. Therefore, a separate damper winding is not needed.
• In contrast to salient pole synchronous motors, which must be started against light loads, synchronous induction motors can start and synchronise against torques greater than full load.
• There is no need for additional starting and control equipment.

SYNCHRONOUS INDUCTION MOTOR MARKET SIZE AND FORECAST

The global Synchronous induction motor market accounted for $XX Billion in 2021 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2022 to 2030.

SYNCHRONOUS INDUCTION MOTOR MARKETNEW PRODUCT LAUNCH

To accommodate future long-distance electric vehicles, Vitesco Technologies is introducing an externally excited synchronous electric machine (EESM) that doesn't use rare earth metals and is made for high ranges and quick highway driving.

The world's first high-efficiency synchronous reluctance (SR) motor with an aluminum cage has been introduced by Nidec Corporation as SynRA (Synchronous Reluctance Motor with Aluminum Cage Rotor). SynRA combines the fundamentals of an SR motor with those of a cage-type induction motor.

When connected to a commercial power source, the cage-type induction motor, utilized as a general-purpose motor for industrial applications, can be turned on. The motor is used in fans, pumps, compressors, cranes, elevators, and many other industrial machinery since it is inexpensive to produce and does not require an inverter (a device to adjust rpm).

The International Electrotechnical Commission (IEC) has established a new level of efficiency called ultra-premium energy efficiency, and ABB IE5 synchronous reluctance motors (SynRMs) are the top choice to satisfy this demand. ABB provides two SynRM product lines:IE5 SynRMs with an output of 5.5 to 315 kW in frame sizes IEC 132 to 315; high-output SynRMs with an output ranging from 1.1 to 350 kW in IEC 90 to 315;

In addition to having up to 50% fewer energy losses than IE2 motors, ABB's IE5 ultra-premium SynRMs also use much less energy and emit significantly less CO2 than the more widely used IE2 IMs.

COMPANY PROFILE

• ABB Motors Drives and Power Electronics 
• ACM engineering 
• Dynaflux
• AB SHOT TECNICS
• ACT Motor GmbH
• ABM Greiffenberger Antriebstechnik GmbH

THIS REPORT WILL ANSWER FOLLOWING QUESTIONS

1. What is the average cost per globalSynchronous induction motor marketright now and how will it change in the next 5-6 years?
2. Average cost to set up aglobal Synchronous induction motor marketin the US, Europe and China?
3. How manyglobal Synchronous induction motor marketsare manufactured per annum globally? Who are the sub-component suppliers in different regions?
4. What is happening in the overall public, globally?
5. Cost breakup of aglobal Synchronous induction motor marketand key vendor selection criteria
6. Where is theTitle Name manufactured? What is the average margin per equipment?
7. Market share ofTitle Namemanufacturers and their upcoming products
8. The most important plannedTitle Namein next 2 years
9. Details on network of majorTitle Nameand pricing plans
10. Cost advantage for OEMs who manufactureTitle Namein-house
11. 5 key predictions for next 5 years inTitle Name
12. Average B-2-BTitle Nameprice in all segments
13. Latest trends inTitle Name, by every market segment
14. The market size (both volume and value) ofTitle Namein 2022-2030 and every year in between?
15. Global production breakup ofTitle Name, by suppliers and their OEM relationship