Global Truck Mirror System Market 2023-2030

    In Stock

    GLOBAL TRUCK MIRROR SYSTEM MARKET

     

    INTRODUCTION

     

    The driver’s vision surrounding the vehicle in a huge truck is substantially more restricted than in other vehicles, particularly passenger automobiles.

     

    The construction of the vehicle greatly obstructs the driver’s view of the near field in trucks. Even with mirrors, the back of the cab and cargo body obstructs the vision immediately to the rear.

     

    In certain circumstances, the driver may immediately observe the region along the left side of the truck by turning his head, although even that view is limited by the width of the container body and the design of the cab.

     

    infographic: Truck Mirror System Market , Truck Mirror System Market Size, Truck Mirror System Market Trends, Truck Mirror System Market Forecast, Truck Mirror System Market Risks, Truck Mirror System Market Report, Truck Mirror System Market Share

     

    The driver’s sight all along the opposite side of the vehicle is almost entirely dependent on indirect vision through mirrors. In comparison to ordinary practise, the regulation requirements for truck mirror systems are modest.

     

    There are no legal restrictions for additional mirrors or blind zones surrounding the car. The number of mirrors routinely utilized in addition to those necessary demonstrates that many truck drivers have sought to solve the issue.

     

    Truckers frequently install convex mirrors alongside the planar mirrors, lookdown mirrors on the passenger side door, and fender/hood-mounted convex mirrors to fill in the blind spot along the side of the truck or to offer a view of the region directly ahead.

     

    Truckers have long known aware of the issue, and many have added extra mirrors to their cars in an attempt to increase visibility.

     

    GLOBAL TRUCK MIRROR SYSTEM MARKET DYNAMICS

     

    Mirrors used on long-haul truck-based vehicles increase the driver’s secondary field of view. Mirrors increase the safety of cyclists and pedestrians such as pedestrians, cyclists, and motorcycle riders.

     

    Because of blind spots in the immediate regions around the vehicle, these groups are at a significant risk of being involved in an accident with big vehicles.

     

    Mirror-relevant collisions account for about 20% of all truck crash involvements, i.e. crashes in which the truck driver is required to utilize mirrors to safely manage.

     

    Most mirror-relevant collisions had relatively modest closing speeds, perhaps because the truck was going slowly, like in start-up and turning incidents, or because both cars were moving that way on the same route and the truck manoeuvred into the other vehicle, as in lane change crashes.

     

    As a result, it is critical to have a well-organized and well-developed programme to ensure that all safety criteria for truck console operators are met at all times.

     

    Volvo has used an indirect vision system to identify people and other things behind the truck, which provides a picture of the environs while behind vehicle via a camera situated at the rear of the truck and a similar monitor in the cab.

     

    GLOBAL TRUCK MIRROR SYSTEM MARKET SEGMENTATION

     

    The Global Truck Mirror System Market can be segmented into following categories for further analysis.

     

    By Truck Application

    • Light Duty Trucks
    • Medium Duty trucks
    • Heavy Duty Trucks
    • Common Usage Trucks

     

    By Truck Haulage Type

    • Long Haulage Trucks
    • Short Haulage Trucks
    • Medium Haulage Trucks

     

    By Mirror System of Consideration

    • Side View Mirrors
    • Rear View Mirrors
    • Fly View Mirrors
    • In View Side View Mirrors

     

    By Regional Classification

    • Asia Pacific Region – APAC
    • Middle East and Gulf Region
    • Africa Region
    • North America Region
    • Europe Region
    • Latin America and Caribbean Region

     

    RECENT MARKET TECHNOLOGICAL TRENDS IN GLOBAL TRUCK MIRROR SYSTEM MARKET

     

    The Truck Mirror process is important in light of the current approach that integrates road safety and cargo safety, which covers high-value and increased cargoes.

     

    The truck reflecting system is considered for better improved visionary needs of the driver controlling the truck method of control.

     

    Camera-monitor systems (CMS) are the most recent addition to the truck mirror system, which is used in motor truck vehicles to display the driver’s rear vision on an indoor monitor.

     

    This also allows for the replacement of standard external mirrors with compatible CMS, allowing for the implementation of innovative design concepts with aerodynamic benefits.

     

    Exterior mirrors, on the other hand, are important car equipment for safeguarding the driver’s indirect rear vision.

     

    The replacement of conventional rear-view mirrors with digital mirrors opens up new opportunities for visual upgrades and supplemental information that might improve driving safety.

     

    However, in-vehicle assistance systems and statistics increase the driver’s mental effort, and an insufficient Human Machine Interface (HMI) can lead to distraction and poor driving ability.

     

    Volvo trucks have an additional safety feature called lane change help. The device includes a radar that is activated by indications and aids in the identification of cars in the blind area.

     

    The driver is warned of the potential risk by a light indicator built into the A-pillar and an extra audible warning. The blind spot is regarded as among the most difficult challenges to overcome when driving.

     

    In order to identify automobiles and other things that are hidden from view, technologies such as blind spot information systems and indirect vision systems are installed in vehicles. This has been a critical advancement in mirror technology for long-haul vehicles.

     

     

    GLOBAL TRUCK MIRROR SYSTEM MARKET NEW TRENDS

     

    The use of digital mirrors reduces the risk of collisions with pedestrians and bicycles.

     

    One of the top manufacturers of commercial vehicles in the world will soon replace the front mirror with a camera system thanks to FICOSA, a prominent global supplier of cutting-edge image processing, security, and communication systems.

     

    The region right in front of the driver’s cab is covered by the FICOSA front camera, which is a very sensitive spot on the car. As a result, the driver can check to see if there are any pedestrians or cyclists nearby, especially before starting his vehicle.

     

    Additionally, because to the improved visual comfort provided by a camera, the driver can increase safety by avoiding crashes.

     

    FICOSA has created cutting-edge camera mirror replacement solutions that offer a larger field of view around trucks and buses to address this issue while enhancing road safety.

     

    Although this enhances drivers’ visual comfort, intelligent image processing actually makes roads safer. Less traffic accidents, less risk to pedestrians and cyclists, fuel savings from reduced air torque, and better driver ergonomics are the end results.

     

    The Class VI mirror’s unique curvature radius allowed it to cover the space in front of the truck. Due to the driver’s cab’s high seating position behind the steering wheel, it made it possible for the driver to see the region in front of it, which was previously difficult.

     

    There was no other way to see if there were any items, persons, or even kids, in this space in front of the truck. People or bikers should never approach the truck at this close of a distance since the driver is likely to miss them, especially when the truck is just starting.

     

    RECENT LAUNCH

     

    Two high-definition (HD) cameras mounted on the side of a vehicle make up MirrorEye. These cameras cover the statutory mirror classes II and IV and take the role of outside mirrors.

     

    The driver has the finest possible view of other road users next to their car and at an angle to the back of their vehicle thanks to a split-screen HD monitor mounted in the window pillar that displays the camera photos in real time.

     

    Since the cameras have a wider field of view than traditional mirrors, a driver utilising the MirrorEye system can see more. This indicates that the camera monitoring system improves road traffic safety.

     

    The ability to incorporate a class V camera into the same enclosure is what distinguishes the camera mirror from other devices. This helps to reduce accidents by enabling the driver to notice blind spots next to their car.

     

    Even under low light conditions, rain, snow, and dust, MirrorEye dependably produces a clear and detailed image. The cameras seamlessly switch between light and dark situations in tunnels and also provide the best nighttime visibility.

     

    Additionally, compared to traditional mirrors, the driver has a greater view of the nearby nighttime traffic thanks to the quality of the night vision feature.

     

    Panning is a feature of MirrorEye for trucks. When the truck is turning or reversing, this function automatically moves the class II picture outward, giving the driver a greater vision and allowing them to see more than just the trailer.

     

    MirrorEye offers drivers a comfortable working environment and eliminates the need for mirror adjustment. Every driver, regardless of size, will always have a great view of the HD camera images thanks to the monitors’ optimal location. Uncomfortable head and body rotations are no longer required because the monitors are placed in the direct line of sight.

     

    COMPETITIVE LANDSCAPE

     

    Several businesses have designed and implemented camera monitor systems to give drivers with extra FOV in the Global Truck Mirror system market.

     

    These technologies can vary from simple rear or front view cameras to 360-degree bird’s-eye views to help drivers be more aware of their surroundings.

     

    Continental, Volkswagen, and Stoneridge have created designs for digital rear-view mirrors with screens installed within the truck cab.

     

    Continental’s ProViu digital mirrors have four cameras with variable field – of – view and two screens incorporated into the A-pillars on opposite sides. To simulate the real side mirrors, the pictures are shown on the monitor as split screens.

     

    This method adds to a larger viewing area and less driver head motions.For this aim, Ford has created two safety features, one of which is a wide-angle mirror incorporated in the corners of rear-view mirrors that displays the blind spots.

     

    The primary feature is a blind spot information service (BLIS), which detects oncoming cars by using sensors mounted on both corners of the rear bumper..

     

    At a speed of 5 km/h, the sensors are active, and the driver is notified if a driving vehicle is detected in the blind zone. The warning appears in the form of a yellow standard blind spot symbol on the outside corner of the rearview mirror.

     

    One of the most significant technological benefits of permitting a 360-degree vision around the vehicle is the use of transparent A- and B-pillars. The proposal also includes extra driving assistant information shown on the head-up display, dubbed the “ghost vehicle.”

     

    Instead of utilizing a regular GPS, this function allows the driver to follow a projected car in the line of sight to a specified location.

     

    Sl no Topic
    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in the Industry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2021-2026
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2021-2026
    19 Market Segmentation, Dynamics and Forecast by Application, 2021-2026
    20 Market Segmentation, Dynamics and Forecast by End use, 2021-2026
    21 Product installation rate by OEM, 2021
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2021
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop