US Ethanol Market 2021-2026

    In Stock

    US ETHANOL MARKET

     

    INTRODUCTION

    Ethanol is a major biofuel that is created naturally by fermentation process or by petrochemical processes such as ethylene hydration. It is seen as an antibiotic and antibacterial in healthcare.

     

    Apart from being an alternate fuel source, it is utilised as a chemical solvent and in the production of organic molecules. Blending ethanol provides major benefits such as increased Research Octane Number (RON) of the blend, fuel embedded oxygen, and faster flame speed.

     

    These ethanol qualities aid in full combustion and assist to minimise automotive emissions such as hydrocarbons, carbon monoxide, and particulate matter.

     

    Ethanol has a calorific value of about 2/3 that of gasoline. Ethanol is made using a variety of different substrates. The substrate utilised in the manufacturing of ethanol is chosen depending on geographical availability and cost efficiency.

     

    Dry milling is the more common and effective method of producing ethanol than wet milling. It yields around 2.8 gallons of ethanol per bushel of maize.

     

     

    infographic: US Ethanol Market , US Ethanol Market Size, US Ethanol Market Trends, US Ethanol Market Forecast, US Ethanol Market Risks, US Ethanol Market Report, US Ethanol Market Share

     

    However, because ethanol has a higher octane number, the engine can run at a high compression ratio without pounding. This significantly improves the engine’s efficiency.

     

    This, paired with optimum spark timing, cancels out the fuel efficiency penalty caused by ethanol’s low calorific value.

     

    The methods of gas chromatography (GC) and high performance liquid chromatography (HPLC) are commonly used to detect and quantify ethanol components. Infrared spectroscopy (IR) is used to ensure the purity of ethanol.

     

    US ETHANOL MARKET DYNAMICS

    Ethanol is produced by both dry and wet milling of maize. Dry mill facilities are built to convert maize into ethanol, with dried grains and carbon dioxide as the principal byproducts.

     

    Dry milling involves processing the entire kernel of corn or other starchy grain (wheat, barley, sorghum) without separating off the various component portions of the grain, such as the germ.

     

    In the United States, ordinary distillation generates 190 proof ethanol, which is further dehydrated to roughly 200 proof (pure alcohol) using a molecular sieve.

     

    This anhydrous ethanol, so named because it lacks water, is then combined with roughly 5% of a denaturant, such as unleaded gasoline, so that it cannot be eaten as a beverage.

     

    Corn is currently used as the principal feedstock for a significant portion of all ethanol generated in the United States.

     

    Sucrose from sugar cane is utilised as an ethanol feedstock in Brazil and Australia, whereas sucrose from beets is being used in Europe to make ethanol. The process of turning sucrose to ethanol is well established.

     

    Local farmer ownership has long been a feature of the ethanol sector in the United States, although ownership of ethanol production has shifted.

     

    Previously, the bulk of ethanol facilities and production were owned and run by corporations. Farmer-owned cooperatives made up a minor portion of ownership and output.

     

    Recent initiatives have resulted in a significant percentage of ethanol plant ownership and operation by farmer cooperatives or limited liability entities (LLC). In the United States of America, ethanol is often combined with gasoline to generate an oxygenated motor fuel.

     

    infographic: US Ethanol Market, US Ethanol Market Size, US Ethanol Market Trends, US Ethanol Market Forecast, US Ethanol Market Risks, US Ethanol Market Report, US Ethanol Market Share

    Ethanol is used to increase the octane of conventional gasoline, to provide oxygen to fulfil Clean Air Act regulations, and as a fuel extender. While ethanol increases the octane content of gasoline, it has a lower energy content.

     

    To know more about Europe Ethanol Market, read our report

     

    US ETHANOL MARKET SEGMENTATION

    The US Ethanol Market can be segmented into following categories for further analysis.

    US Ethanol Market By Product Manufacturing Process

    • Natural Extraction Process
    • Synthetic Extraction Process
    • Microbiological Process
    • Converted / indirect Extraction process

     

    US Ethanol Market By Generation of Ethanol

    • Sugar and Molasses Based
    • Grain Based
    • First Generation
    • Second Generation
    • Denatured Ethanol
    • Undenatured Ethanol

     

    US Ethanol Market By Usage

    • Vehicular Usage / Automotive
    • Commercial Usage
    • Residential usage
    • Fuel and Fuel Additives
    • Beverages
    • Disinfectants
    • Personal Care
    • Industrial Solvents

     

    US Ethanol Market By Regional Classification

    • Western Region – USA
    • Mid-West Region – USA
    • Northeast Region – USA
    • Southern Region – USA

     

    RECENT US ETHANOL MARKET TECHNOLOGICAL TRENDS

    The supply of traditional biofuels, such as 1G ethanol and palm Stearin/non-edible oil seeds-based biodiesel, is restricted. With recent attempts such as broadening the feedstock base for ethanol production, capacity expansion plans, and exploration of used cooking oil (UCO) for biodiesel production.

     

    Today, ethanol is manufactured from a range of sugar and starch-containing feedstocks for use as an industrial chemical, drinks, alcohol, and fuel ethanol. Over the course of more than a decade, fuel ethanol technology has undergone substantial study and development.

     

    Conventional techniques have been improved, and developments in lignocellulosic biomass conversion continue. Through constant efforts and understanding of process specifics, as well as good plant design, advanced technologies in fermentation, distillation, and wastewater treatment have been developed.

     

    Extensive R&D has resulted in the most recent technology for incorporating and positioning feedstocks of numerous alternative categories within the manufacturing needs.

     

    The LCB Production Methodology has had a significant role in these elements. This technology makes use of abundantly accessible in nature agri and forest waste to generate the requisite production volume.

    infographic: US Ethanol Market , US Ethanol Market Size, US Ethanol Market Trends, US Ethanol Market Forecast, US Ethanol Market Risks, US Ethanol Market Report, US Ethanol Market Share

     

    Conversion of corn kernel fibre fraction to ethanol, as well as the selection and development of novel and higher-value coproducts Many techniques, such as rapid fibre, quick germ, COPE process, enzymatic milling, dry grind, and wet milling, are used.

     

    Both dry grind and wet milling procedures are prevalent nowadays, but the dry grind method produces the majority of ethanol since it is less capital and energy demanding.

     

    Ethanol boosts engine performance by adding octane to gasoline. Because an E-10 mix adds 2.5 points of octane, E-10 users benefit from higher-quality gasoline.

     

    This property also benefits gasoline refiners, who may refine a sub-octane base into which ethanol is added to produce 87-octane conventional gasoline.

     

    This intervention has shown to be quite beneficial for the United States in terms of raising awareness about air quality indicators and adhering to the Kyoto Protocol as a Section I nation.

     

    RECENT ACQUISITIONS

     

    Indiana Renewable Fuels (IRF) in Rochester, Indiana, has been acquired by Advanced BioEnergy LLC. Advanced BioEnergy has already begun work on a 100 MMgy ethanol plant near Fairmont, Neb., while IRF aims to build a 100 MMgy ethanol facility in Rochester.

     

    Both corn-fed facilities will be built by Fagen Inc. using ICM Inc. process technology. IRF aims to begin site preparation this autumn, followed by complete construction. IRF will become a wholly owned subsidiary of Advanced BioEnergy but will keep its name for now. At the time of publication, the company was in talks with ethanol and distillers grains marketers.

     

    The company’s initial acquisition, the IRF, exemplifies a growth strategy that combines good commercial foundations with local community involvement.

     

    US ETHANOL MARKET COMPETITIVE LANDSCAPE

    Considering the growing elements of India’s ethanol generating capabilities and other new enterprises as part of technical advances in ethanol production through diverse raw materials has resulted in significant rivalry on a localised scale.

     

    ADM Corporation, the world’s largest ethanol producer, has just been included in the policy integration to pump roughly 10% of the country’s biofuel production capacity.

     

    This has been accomplished by its most recent indigenized initiatives to expand production capacity and meet volumetric needs. They have extensively integrated dry mill technology to increase output levels through maize and corn inputs.

     

    Cargill manufactures and sells ethanol for industrial usage in goods such as solvents, extractants, antifreeze, and intermediates in the production of different organic compounds.

     

    This contains 96 percent and 99 percent ethanol, both with and without denaturants. This alcohol is frequently used in the coatings, inks, and adhesives industries.

     

    As part of enhancing efficiency and lowering energy consumption structures, the business achieved a 23% concentration increase using enzymes, lowering emissions per unit of output.

     

    MAJOR PLAYERS IN US ETHANOL MARKET

     

     

    THIS US ETHANOL MARKETREPORT WILL ANSWER FOLLOWING QUESTIONS

    1. US Ethanol Market size and Forecast, by region, by application
    2. Average B-2-B price for US Ethanol Market, by region, per user
    3. Technology trends and related opportunity for new US Ethanol Market tech suppliers
    4. US Ethanol Market share of leading vendors, by region,
    5.  Coronavirus impact on US Ethanol Market earnings
    Sl no Topic
    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in the Industry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2021-2026
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2021-2026
    19 Market Segmentation, Dynamics and Forecast by Application, 2021-2026
    20 Market Segmentation, Dynamics and Forecast by End use, 2021-2026
    21 Product installation rate by OEM, 2021
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2021
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop