US Refrigerant Market 2024-2030

    In Stock

    US REFRIGERANT MARKET

     

    INTRODUCTION

    Refrigerant is required for chilling refrigeration and air conditioning systems, but that is not a consideration something most consumers consider when choosing a transaction. Nevertheless, with shifting refrigeration legislation and certain chemical compounds becomes prohibited.

     

    Whenever the gas is pushed between a compressors and evaporation, it absorbs the heat and emits cooling effect. During the thermodynamic system, it alternates in between liquids and an energy is consumed.

     

    Whenever the coolant flows through to the expansion valve in the system, it commences as a solution. Because of the quick change in pressure, it releases the energy, distorting it in to a gaseous.

     

    This warmth from the commodity within the equipment is absorbed by the gaseous refrigerant as it flows through to the metal evaporator section inside of the equipment.

     

    These mechanical, rotational motion, and tangential rotors seem to be the most common in household or low-power commercial refrigeration. A revolving compressors is comparable to a gasoline engine.

     

    infographic: US Refrigerant Market, US Refrigerant Market Size, US Refrigerant Market Trends, US Refrigerant Market Forecast, US Refrigerant Market Risks, US Refrigerant Market Report, US Refrigerant Market Share

     

    The motor rotates a cylinder, which sucks in and compresses the refrigerant in a cylinder. The gas is sucked from the evaporation as even the pistons starts going down into in the cylinders, enhancing the effectiveness of the canister.

     

    Whenever the refrigerant strength within the cylinder equals the pressure in the evaporation, the inlet valve shuts. ASHRAE classifies refrigerants, because its recognizable ‘R’ designations are allocated including a set of regulations.

     

    For instance, consider the categorization of halogen refrigerants formed from aromatic hydrocarbons as well as comprised of always one ingredient.

     

    US REFRIGERANT MARKET DEVELOPMENTS AND INNOVATIONS

    S No Overview of Development Development Detailing Region of Development Possible Future Outcomes
    1 Honeywell announces non-flammable refrigerant under 150 GWP Honeywell has announced a new non-flammable refrigerant for medium temperature commercial refrigeration applications with a GWP of less than 150. Global Scale This would enhance better Technologies and production

     

    Manufacturers of refrigerants were expected to reduce their output by 10% by 2023.

     

    The 2020 American Innovation in Manufacturing (AIM) Act, which gives the Environmental Protection Agency (EPA) the power to gradually reduce usage and production of high-GWP HFC refrigerants in the U.S. by 85% over the following 15 years, is responsible for this decrease. This includes R-410A, which is utilised in virtually all home and business air conditioning systems in the United States.

     

    R-410A is a nonflammable (A1) refrigerant; however, it can be replaced with R-32 and R-454B, which are both slightly flammable (A2L) refrigerants. HVAC contractors and technicians will need to take additional safety precautions in order to install or maintain equipment that uses these new refrigerants.

    US REFRIGERANT MARKET DYNAMICS

    Increasing growing market for commercial cooling system inside the FMCG industry is driving the economy’s development, attributed to the growing usage of pre-packaged& processed carbs & refreshments in emerging nations and the avoidance of semi-processed foodstuff & fluids deterioration.

     

    Additionally, the substantial rise of updating cold storage systems across emerging markets propels expansion plans. However, the efficient refrigeration industry’s development is hampered by high energy requirements for operating and massive investment in upkeep of industrial cooling system.

     

    Furthermore, even during COVID-19 epidemic, the construction, industrial, lodging, and tourist businesses were severely impacted. Production facilities were likewise halted or severely constrained.

     

    Construction and automotive operations, as well as their supply networks, have been impeded on a worldwide scale. This resulted in a deterioration. This resulted in a decrease in cooling and heating manufacture, which immediately hampered the efficient refrigeration sector.

     

    Despite this, beverages, sewage treatment plants, and drug manufacturers remained working at full capacity, resulting in economic stability.

     

    Refrigeration technology is in great particularly in the emerging nations, owing to the growing urbanization and an increase in manufacturers’ preference for economical cooling applications.

     

    Furthermore, rising per capita household incomes in developed states within the USA have resulted in a rise in the usage of air conditioning units, resulting in an unprecedented growth in global power consumption.

     

    Furthermore, an increase in the need for environmental improvement of manufacturing equipment that uses cold environments across diverse production units, along with an increase in consumption for absorption chiller based within the Oil and gas industries.

     

    US REFRIGERANT MARKET SEGMENTATION

    The US Refrigerant Market can be segmented into following categories for further analysis.

    By Application

    • Construction Industry
    • Automotive Industry
    • Transportation Industry
    • Electrical and Electronics Industry
    • Consumer Products industry
    • Medical Devices Industry
    • Packaging Industry
    • Machinery Industry
    • Equipment Industry

     

    By Product Type

    • Air Conditioning
    • HVAC Systems
    • Large Scale Refrigeration
    • Industrial and Commercial Refrigeration

     

    By Operational Focus Type

    • Halocarbons
    • Azeotropic Refrigerants
    • Zeotropic Refrigerants
    • Hydrocarbon Refrigerants
    • Inorganic Refrigerants

     

    By Regional Classification

    • Western Region – USA
    • Mid-West Region – USA
    • Northeast Region – USA
    • Southern Region – USA

     

    RECENT TECHNOLOGICAL TRENDS IN US REFRIGERANT MARKET

    The Refrigerants are secondary metabolites having special thermodynamics characteristics that influence the efficiency of refrigeration operations.

     

    As a result, refrigerant characteristics play an important role in the design and/or procurement of refrigerants, and also in the development of cooling system in terms of operational efficiency and environmental implications.

     

    Cryo is usually employed around the world in industries such as food preservation, air conditioning, industrial manufacturing, and medical attention, to name a few.

     

    The primary and secondary features of these kind of technologies are intended to operate efficiently in achieving the specified procedures, particularly refrigerant evaporation at intermediate temperature plus distilling at high temperatures and pressures.

     

    Magnetic conditioning is a new, environmentally friendly technique based on a magnetic field.Just in the small particle range of flow rates does the AMR cycle’s Overall efficiency (COP) outperform the vapor compression cycle facility.

     

    The COP of such AMR cycles is greater than those of the vapor compression cycle unit except in the relatively high flow-rate range in a parallel – plate steam generator.

     

    In addition, the greener refrigerator employs calories cooling system, which generates the Bar caloric effect based on Raman research concepts, which disclose that providing pressures to the molten solution inhibits the bending and unpredictable temperature movements of polymer molecules.

     

    The heating in substances due to temperature fluctuations is referred to as the Bar caloric phenomenon.

     

    RECENT LAUNCH

    Daikin is offering a home comfort product in North America for the first time that uses R-32, a refrigerant with one-third the Global Warming Potential (GWP) of the most commonly used refrigerants in the US and Canada.

     

    The new Daikin ATMOSPHERA system from Daikin North America LLC uses R-32 refrigerant and is a single-zone, ductless system with up to 27.4 SEER, 13.8 HSPF, and 16.3 EER ratings for ultra-efficient cooling and heating over its R-410A predecessor line, the LV Series. Indoor and outdoor heat pumps are offered in four capacities, ranging from 9,000 to 24,000 BTU.

     

    In more than 100 countries and territories, Daikin has sold over 33 million R-32 systems. We’re ecstatic to be the first in North America to deliver this tried-and-true technology. We are sure that R-32 has the all-around performance benefits to make it the optimal replacement for R-410A, based on the projected 160 million R-32 systems sold by Daikin and other manufacturers globally.

     

    In comparison to R-410A models, Daikin ATMOSPHERA offers a strong, new single-zone system to North America that has a reduced GWP, is more efficient, and may help lower end-user electric expenses. Daikin ATMOSPHERA heat pumps also have innovative features that promote comfort, cleanliness, and usability while simplifying maintenance.

     

    COMPETITIVE LANDSCAPE

    The fast rise of the consumer electronics sector, as well as rising demand for household air conditioning systems, are significant drivers driving the worldwide market.

     

    Numerous consumer device businesses, including the foodservice industry and indeed the automotive sector, is one of all high, due mainly to urbanization and rising discretionary money.

     

    As the demand for pre-packaged meals and transportable refrigerators accelerates, this boom is favourably impacting the worldwide refrigerant industry. Other distantly interconnected businesses, including as architecture, oil and natural gas, and pharmaceuticals, are growing.

     

    As a result, the sector of artificial refrigeration systems is expected to increase at the fastest pace during the length of the assessment.

     

    Honeywell Incorporated is growing within the US Market to have better multi varied applications of the refrigerants focusing on better climate change protocols.

     

    The Solstice N40 is a flame retardant, low-GWP HFO blend designed for innovative grocery store refurbishments, particularly low- and medium-temperature refrigeration. It has a GWP of 1273 and a GWP dramatic drop of 68 percent when compared to.

     

    It is recognized in the United States Environmental Protection Agency’s SNAP programme as a replacement for ozone-depleting compounds. In addition, the Solstice N41 is a non-flammable, low-GWP agent expected to replace R-410A in static home and commercial air conditioning systems.

     

    It is a near-drop-in alternative for R-134a in automotive A/C systems, assisting manufacturers worldwide in meeting EU low Greenhouse criteria.

     

    Dow DuPont Solutions if growing towards better global warming and protocol-based climate change regulations with much required Low GWP operability. The Opteon YF outperforms the EU MAC requirement while also providing an energy-efficient, reliable, as well as simple-to-implement solution.

     

    According to SAE testing, HFO-1234YF outperforms atmospheric co2, another alternatives coolant, in associated with environmental effectiveness while posing the least risk of usage in satisfying consumer demands.

     

    Opteon YF has physical qualities that are comparable to HFC-134a, allowing it to be utilised in existing HFC-134a installations with little equipment adjustments. It has a GWP of 4 over a 100-year timeframe, which exceeds the EU MAC guideline restriction of 150.

     

    It is not only 97 percent less expensive than the EU requirements, but it is also 99.7 percent less expensive than HFC-134a, which has a GWP of 1430. When contrasted to other chlorofluorocarbons, It would have the least impact on the environment during its whole product lifecycle.

     

    US REFRIGERANT MARKET COMPANIES PROFILED

    Sl no Topic
    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in theIndustry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2024-2030
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2024-2030
    19 Market Segmentation, Dynamics and Forecast by Application, 2024-2030
    20 Market Segmentation, Dynamics and Forecast by End use, 2024-2030
    21 Product installation rate by OEM, 2024
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2024
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop