Global Weapon Mounts Market 2023-2030

    In Stock

    GLOBAL WEAPON MOUNTS MARKET

     

    INTRODUCTION

    A mounting weapon is a mounting device or mechanism used to hold a gun on a platform to work at full capacity. Weapon assemblies might be divided into two categories: static assemblies and non-static assemblies. An unsporting armed support component is a static mount, either attached on a fortification or part of a vehicle directly to the ground.

     

    Stable function requirements for the weapons transported are more required. Using new materials and methods, enough firing stabilization is achieved that cannot be achieved previously. If, at the conclusion of WWII, the ratio of one weapon to its mount was 0.4, this ratio currently exceeds 2

     

    infographic: Weapon Mounts Market, Weapon Mounts Market Size, Weapon Mounts Market Trends, Weapon Mounts Market Forecast, Weapon Mounts Market Risks, Weapon Mounts Market Report, Weapon Mounts Market Share

     

    Current automatic weapons are characterized by the extremely small weight, the tiny size of the conveyance, mostly machines, grenade launchers and small calibre cannons, and are carried by two troops at the most.

     

    The arms are placed either on carts or bipods or tripods on wheel and track. Both transfer forces through their own components from the firearm to the ground. In every elevation and room angle, the structures need to provide a steady functioning.

     

    When the bullet leaves the barrel muzzle, the weapon is steady to create the battery. The weapons must also have such speeds and accelerations as to guarantee the crew and equipment have adequate operating conditions. The gun may move and oscillate as it is being fired. But as the bullet exits the barrel the variations in the angle lower the chance of impact in the event of bursting.

     

    GLOBAL WEAPON MOUNTS MARKET DYNAMICS

    The development of the fighting environment has resulted in the armaments being upgraded and modified thereafter. Innovators have spent enormous money developing advanced weapons systems due to the requirement for high-precision, lightweight and small arms.

     

    The advancement of technology has led to the creation of high target hit guided weapons, backed by several accessories, such as guns, night-vision equipment, lasers, and fire control systems.

     

    Over the last decade, raw material prices have seen considerable fluctuation. Disputes between Contracting Parties on specific provisions of the defence, such as the technology clause, have therefore also resulted in the cancellation of projects that have been approved.

     

    A typical benefit of penetrating and destroying highly armoured adversaries is predicted to increase the market for light weapons. The growing geopolitical divide in Asia-Pacific, the Middle East and Africa have pushed governments to boost their yearly defence spending and budget to help modernise their weapons.

     

    There have been increases in both U.S. military activity and marine presence in the seas, showing the country’s increased stakes in disputes that might, if not handled appropriately, convert parts of Asia’s maritime areas from thriving commerce routes to battlegrounds. Conflicts escalating across the world over commercial or military supremacy are likely to fuel demand for naval missile launch systems globally.

     

    The Indian Navy has ordered two Super Rapid Gun Mounts (SRGM), the primary weapons that are standard for all of the Indian Navy’s vessels, according to the state-run engineering company BHEL.

     

     For the production, installation & commissioning, and lifetime support of these weapons, Bharat Heavy Electricals Ltd (BHEL) has indigenized them and built specialised, sophisticated manufacturing and inspection facilities at its Heavy Electrical Equipment Plant, Haridwar.

     

    The Indian Navy has optimised costs, consolidated expertise, and increased self-reliance by standardising these guns for all large warships. In order to meet future warship requirements, BHEL is also developing an updated version of these guns with increased range.

     

    The government-run engineering company has provided essential products and services to the defence and aerospace industries for more than three decades.

     

     Specialized manufacturing facilities and capabilities have already been established in this direction with the intention of significantly increasing self-reliance in the production of defence equipment, and the company claimed that the initiatives taken will be a driving force behind the government of India’s AatmaNirbhar Bharat Abhiyan.

     

    GLOBAL WEAPON MOUNTS MARKET SEGMENTATION

     

    The Global Weapon Mounts Market can be segmented into following categories for further analysis.

     

    By Technology Type

    • Static Mount Technology
    • Non-Static Mount Technology

     

    By Battery Type

    • Unmanned Systems
    • Manned Systems

     

    By Usage Application

    • Marine Corps / Forces Based
    • Naval Forces Based
    • Land Forces
    • Air Combat Forces

     

    By System Type

    • Homeland Security Operations
    • Military Operations
    • Mixed Operations

     

    By Product Component Type

    • Combat Vehicle Mounting
    • Aircraft mounting
    • Naval Vessel Mounting

     

    By Product Type

    • Monopod
    • Tripod
    • Bipod
    • Fixed Mount
    • Coaxial Mount
    • Turret
    • Pedestal Mount
    • Swing Arm Mount

     

    By Regional Classification

    • Asia Pacific Region – APAC
    • Middle East and Gulf Region
    • Africa Region
    • North America Region
    • Europe Region
    • Latin America and Caribbean Region

     

    RECENT MARKET TECHNOLOGICAL TRENDS IN GLOBAL WEAPON MOUNTS MARKET

    Growing terrorism around the globe, unresolved border concerns between countries such as India & Pakistan, India & China, and North Korea & South Korea, weapons races between nations and national forces conflicts are some of the key drivers of the global guns mount industry.

     

    Reduced military budgets are nonetheless likely to impede industry development. Increased applications of weapons aboard naval ships are expected to offer profitable opportunity to major participants on the international weapons mountain market (Destroyers, Frigates, Corvettes and other).

     

    There has been an integrated approach towards having a proper weapons mount and control system placed onboard land-based assets of the military. This includes the Naval, Marine and Air Assets of the military requirements.

     

    The technology has been developed in such a manner that all primary functionality is ergonomically presented, ensuring that Surveillance and Target Acquisition cycles are near instantaneous without the operator having to break visual contact with the Operator’s Display. Dual command facilitates shared capabilities, shorter response times and reduced sensor-to-shooter cycles.

     

    Infographic: Global Weapon Mounts Market, Global Weapon Mounts Market Size, Global Weapon Mounts Market Trends,  Global Weapon Mounts Market Forecast,  Global Weapon Mounts Market Risks, Global Weapon Mounts Market Report, Global Weapon Mounts Market Share

     

    There has been most recently seen through a video-based integration, wherein The Video Tracker Module can reduce the engagement sequence by as much as 50 percent, whilst allowing the operator to focus on finely adjusting the hit point so that selected areas of a target can be engaged with pinpoint accuracy.

     

    The further advancement has brought upon integrations such as the ammunition Feed From Below Armour can also be offered for certain weapon configurations. Sensor imagery from the Weapon mount system can be distributed via a Local Area Network and displayed where required inside the platform. This overcomes the loss of situational awareness incurred by removing  the gunner from the platform hatch or deck.

     

    COMPETITIVE LANDSCAPE

    Rising maritime conflicts in the South China Sea and Mediterranean between various nations are driving investments in the acquisition and deployment of new navy warships.

     

    Currently, the naval forces are updating or replacing their old naval fleets with newer-generation warships as part of a modernization effort. As the need for additional naval vessels grows, so will the need for missiles and missile launch systems in the years to come.

     

    FN Herstal has been part of the latest lightweight based mount development which is focused on better technological advancement. The FN® M3M airborne proven machine gun technology offers the most powerful weapon system for land and sea applications combining lightweight and compactness.

     

    Fully mechanical FN® Light Multi Weapon Mount does not require any electrical power, making firing possible even if the vehicle faces electrical problems.

     

    The soft-mounted FN MAG® 7.62mm machine gun guarantees outstanding balance during firing, improved comfort, and higher accuracy. It operates on a full mechanical operational ability with no or minimal electric power used.  It is integrated with a Safety lever to prevent uncommand firing and also provisions high hit probability. The mount has a capability of 250 rounds ammunition box.

     

    SAAB Defence Systems has been focused on development of the latest verge of mount systems working towards automated sighting and portable systems.  The track fire has been part of the required development featured mount and weapons station. Trackfire is designed for use on all types of military platforms including vehicles, vessels, and static emplacements.

     

    The operator benefits from a fully stabilised, remotely operated weapons and sensor system which provides cutting edge performance irrespective of environment.

     

    It has been designed such that the weapon has a Stabilised Independent Line Of Sight (SILOS) enables maintaining line of sight on target that provisions better and Exceptional hit performance thus minimising ammunition usage and collateral damage. 

     

    Track fire is designed to integrate a wide menu of weapons and sensors. Including the stabilised weapon platform capability and SILOS function, this enables the operator to deliver a variety of effectors, irrespective of the environment, with cutting edge performance.

     

    STS Gun Systems and Group has been taking into market, the most composite and lightweight based gun mounting systems. It has most recently designed the MK93 MOD Mounts, which has the capacitance of operation of the MK93 machine gun mount being accepted from the M2 series .50 calibre machine gun and the MK19 MOD3 40mm grenade launcher.

     

    This is a buffered mounting system and is commonly used in conjunction with the Universal Pintle Adapter (UPA), and Traverse and Elevation Mechanism (T&E). Adapters are also available to enable the MK93 to accept M240/M249 and M60 series weapons.

     

    The mount has eben designed in such a way that it accepts all weapon mounts with a standard Navy or Army pintle, the MK38 can be used as a basis for the integration of a wide variety of weapon systems. Ideal for ECP, vehicle and maritime applications, this mount can be used with or without the exterior support legs, depending on application and weapon system.

     

    NEW TECHNOLOGY

     

    Gyro-Stabilised Remote Control Weapons Mount for UK MoD Flex Force’s ASP stabilised small arms mount combines the accuracy of a remote weapon station with the situational awareness and rapid target acquisition of a manual mount to increase effectiveness and decrease target acquisition time.

     

    Flex Force Enterprises has completed the sale of three distinct types of its ASP stabilised small weapons mount, which increases accuracy and lethality for users.

     

    Flex Force has been collaborating with the U.K. Ministry of Defense’s (MoD’s) Defence Science and Technology Laboratory (Dstl) since 2017 on a low-cost, crew-served weapon mount that improves the weapon’s accuracy and lethality from multiple platforms while optionally enabling the weapon’s suppressive, area-effect capabilities. 

     

    Dstl tested and assessed a prototype ASP system, and initial feedback resulted in decreased weight and enhanced accuracy while keeping operator simplicity of use. The UK systems will be utilised to assist several MoD stakeholders, including the Royal Navy’s Autonomy and Lethality Accelerator, NavyX. 

     

    The ASP is designed for difficult conditions and combines a manual mount’s situational awareness and quick target acquisition with a remote weapon station’s precision.

     

    With its improved precision and lethality and lower total cost of ownership, it may improve operational effectiveness and shorten the time it takes to acquire targets while delivering 10-times as many rounds on target. 

     

    For the 5.56mm, 7.62mm, and 12.7mm calibres, the ASP is offered in crew-served, crew and remote, and remote control alone variants. Only U.S. and foreign defence agencies as well as platform OEMs are being marketed to.

     

    COMPANIES PROFILED

     

    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in the Industry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2023-2030
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2023-2030
    19 Market Segmentation, Dynamics and Forecast by Application, 2023-2030
    20 Market Segmentation, Dynamics and Forecast by End use, 2023-2030
    21 Product installation rate by OEM, 2023
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2023
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop