Global Automotive Solar Control Interlayer Film Market 2023-2030

    In Stock

    GLOBAL AUTOMOTIVE SOLAR CONTROL INTERLAYER FILM MARKET

     

    INTRODUCTION

     Your car can suffer from the sweltering heat of summer, dust and dirt flurry, and the occasional downpour.

     

    High temperatures also prevent the air conditioner from operating at its best, which makes the situation much more uncomfortable.

     

    Solar control glass is a complete solution for all heat-related problems. In addition to lowering interior temperatures, it also filters out dangerous UV and IR rays.

     

    These laminated car windshields are made of two sheets of glass sandwiched together with a strong plastic interlayer, such as poly-vinyl butyral.

     

    The plastic interlayer is combined with an additional layer that absorbs or reflects up to 99% of UV and IR radiation in solar control glass, which goes one step further.

     

    Enhancing Fuel Efficiency Solar control glass increases fuel efficiency and reduces carbon dioxide emissions by reducing A/C usage by 10% to 15%.As a result, the burden on the air conditioner is reduced, which results in fuel savings.

     

    Greater Comfort Although it is usually preferable, parking in the shade is not always an option.You must endure the pain until the heat builds up and dissipates.

     

    The solar-coated windshield absorbs the infrared rays from the Sun that produce too much heat, lowering the interior temperature of the car and enhancing comfort inside.

     

    Solar control glass for your automobile windshield is always advised by auto glass specialists like Windshield experts in Noida and other locations.

     

    Longer Life of the Upholstery It becomes intolerable to sit inside the car or even grasp the steering after being in the sun for a long time.

     

    GLOBAL AUTOMOTIVE SOLAR CONTROL INTERLAYER FILM MARKET SIZE AND FORECAST

     

    infographic: Automotive Solar Control Interlayer Film Market, Automotive Solar Control Interlayer Film Market Size, Automotive Solar Control Interlayer Film Market Trends, Automotive Solar Control Interlayer Film Market Forecast, Automotive Solar Control Interlayer Film Market Risks, Automotive Solar Control Interlayer Film Market Report, Automotive Solar Control Interlayer Film Market Share

     

     

    The Global Automotive Solar control interlayer film market accounted for $XX Billion in 2022 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2023 to 2030.

     

    NEW PRODUCT LAUNCH

     SEKISUI CHEMICAL launched S-LEC Automotive Solar control interlayer film,  Heat-insulating microparticles are used in S-LEC Solar Control Film and are distributed uniformly.

     

    This makes it possible to block UV and infrared radiation (with wavelengths of 1500–2100 nm), preventing skin irritation and a sharp rise in vehicle temperature.

     

    S-LEC Solar Control Film-equipped windshields can lower steering wheel temperatures by up to 10 degrees when compared to those with regular windshields, especially during the summer.

     

    Today, using a phone while driving is a requirement.

     

    Radio waves are difficult for mobile phones and Electronic Toll Collection  devices to receive because to the standard heat reflecting glass’s metal coating, which reflects radio signals.  Major radio waves of all frequencies can pass through glass while being blocked by S-LEC Solar Control Film.

     

    The Saflex S series superior solar absorption interlayer has been introduced by Solutia Inc., the world’s top producer of polyvinyl butyral (PVB) interlayer for laminated glass, for the global automobile glazing market. More rigorous CO2 emissions criteria must be met by the car industry in order to comply with international environmental rules.

     

    The industry needs to find fresh approaches to develop automobiles that are more energy-efficient when taking into account the rising number of consumers interested in lowering their environmental footprint while retaining comfort and quality. When it comes to this, Saflex S series advanced solar absorption interlayers can be useful.

     

    In addition to the safety advantages of laminated automotive glass, Saflex S series advanced sun absorption interlayers offer HVAC engineers a practical method to assist regulate the interior temperature of a car. A vehicle’s air conditioner may not need to run as frequently, improving fuel efficiency and cutting CO2 emissions.

     

    This is accomplished by lowering the heat that is transmitted through the glazing. According to a field evaluation by the National Renewable Energy Laboratory (NREL) in the U.S. A 5 degree Celsius decrease in cabin temperature could result in a 3% boost in fuel efficiency.The energy utilised by the climate control system when cooling the car can be decreased with solar control film. 

     

    Through testing with electric cars, SEKISUI S-LEC demonstrated a verified cost savings of up to 20% on air cooling, which significantly helps EVs’ driving ranges.

     

    In contrast to competing technologies, Saflex S series technology absorbs infrared radiation. In order to accept electronic equipment like GPS, mobile phones, and electronic toll collectors, these alternative technologies frequently have to rely on “deletion areas” or eliminated parts.

     

    Electronic gadgets can still function effectively even when these parts have been removed; however, this may limit where consumers can use or store their devices in their cars and may lessen the glazing’s total solar effectiveness.

     

    In comparison to reflecting technologies, the Saflex S series is more compatible with electronic devices, requiring less additional technical design and increasing efficiency.

     

    In addition, Saflex S series solar absorption interlayer offers a high-performance and reasonably priced option for use in pure electric and hybrid vehicle systems. Saflex S series give car designers the possibility to utilise smaller, lighter air conditioning systems and enable electric vehicles to enhance the driving range for each charge by lowering cabin heat.

     

    In comparison to the range of an electric vehicle with a standard full air conditioning load, studies by the NREL (National Renewable Energy Laboratory) show that drivers can increase their range by 15% to 25% under typical conditions by reducing the air conditioning load (by using a smaller air conditioner or using it less frequently).

     

    COMPANY PROFILE

     

    THIS REPORT WILL ANSWER FOLLOWING QUESTIONS

    1. How many Automotive Solar control interlayer film are manufactured per annum globally? Who are the sub-component suppliers in different regions?
    2. Cost breakup of a Global Automotive Solar control interlayer film and key vendor selection criteria
    3. Where is the Automotive Solar control interlayer film manufactured? What is the average margin per unit?
    4. Market share of Global Automotive Solar control interlayer film market manufacturers and their upcoming products
    5. Cost advantage for OEMs who manufacture Global Automotive Solar control interlayer film in-house
    6. key predictions for next 5 years in Global Automotive Solar control interlayer film market
    7. Average B-2-B Automotive Solar control interlayer film market price in all segments
    8. Latest trends in Automotive Solar control interlayer film market, by every market segment
    9. The market size (both volume and value) of the Automotive Solar control interlayer film market in 2023-2030 and every year in between?
    10. Production breakup of Automotive Solar control interlayer film market, by suppliers and their OEM relationship

     

    Sl no Topic
    1 Market Segmentation
    2 Scope of the report
    3 Abbreviations
    4 Research Methodology
    5 Executive Summary
    6 Introduction
    7 Insights from Industry stakeholders
    8 Cost breakdown of Product by sub-components and average profit margin
    9 Disruptive innovation in the Industry
    10 Technology trends in the Industry
    11 Consumer trends in the industry
    12 Recent Production Milestones
    13 Component Manufacturing in US, EU and China
    14 COVID-19 impact on overall market
    15 COVID-19 impact on Production of components
    16 COVID-19 impact on Point of sale
    17 Market Segmentation, Dynamics and Forecast by Geography, 2023-2030
    18 Market Segmentation, Dynamics and Forecast by Product Type, 2023-2030
    19 Market Segmentation, Dynamics and Forecast by Application, 2023-2030
    20 Market Segmentation, Dynamics and Forecast by End use, 2023-2030
    21 Product installation rate by OEM, 2023
    22 Incline/Decline in Average B-2-B selling price in past 5 years
    23 Competition from substitute products
    24 Gross margin and average profitability of suppliers
    25 New product development in past 12 months
    26 M&A in past 12 months
    27 Growth strategy of leading players
    28 Market share of vendors, 2023
    29 Company Profiles
    30 Unmet needs and opportunity for new suppliers
    31 Conclusion
    32 Appendix
     
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop