By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
The signal generator that generates harmonics from its input signal is called a comb generator. The spectral components of the output are spaced out equally. Both the EMI test and the EMC test make use of the comb generator.
Broadband frequency synthesizers are another place where comb generators are frequently used.These synthesizers produce low-frequency referenced high-frequency output.In a PLL circuit, this extremely stable high frequency output is also used as a frequency reference input. Simply connect the antenna port to the comb generator, and it will begin radiating, making it simple to use.
The Global comb generators market accounted for $XX Billion in 2021 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2022 to 2030.
Keysight comb generators ( Model U9391C) are ideal for use in phase calibration applications due to their excellent phase and amplitude flatness. Precision phase calibration for non-linear measurements is made possible by the specifications of our comb generator, which range from 10 MHz to 67 GHz.
They also offer customer-selectable USB-controlled frequency dividers and comb generators that can be used to calibrate PNA and PNA-X network analyzers for phase and delay measurements of frequency converters without the need for reference or calibration mixers.
The HPR7227A comb generator from AMCAD Engineering, a leading provider of measurement, modeling, and design solutions for microwave components, circuits, and RF subsystems, produces harmonic signals with a defined and known phase connection between each tone.
With frequency intervals as tiny as 10 MHz, it can produce signals up to 26.5 GHz, or up to 40 GHz with a stronger input signal (up to 7 GHz). The Picosecond Pulse Labs Low Phase Noise Model No. 7112 is a comb generator with high performance.The input frequency and power range are covered by the comb generator’s operation.
Low Phase Noise and Low Input Power Characterize a New Breed of Comb Generators Using monolithic GaAs nonlinear transmission line (NLTL) circuits, Picosecond Pulse Labs (PSPL) has unveiled a new series of comb generators. The Low Phase Noise (LPN) Comb Generator product line is the name of the goods produced by PSPL.
Step recovery diodes have historically been the semiconductor device for comb creation that is employed the most frequently (SRD). Despite the fact that SRDs have been extremely helpful in this application, they do have several drawbacks, most notably the introduction of unwanted phase noise and a relatively constrained range of input frequency and power.
The nonlinear transmission line is a novel type of circuit that this new family of comb generators uses to produce harmonics (NLTL).The physical process used by NLTLs for frequency multiplication is fundamentally different. NLTL-based comb generators provide a number of major technological advantages over SRD-based comb generators, including: Low Phase Noise: A multiplier module’s overall performance is enhanced by better phase noise performance.
SRD comb generators’ subpar phase noise performance frequently restricts multiplier phase noise performance. The flexibility of input frequency allows for changes in input frequency or the use of a single device across a variety of applications. Low input power enables amplifier power requirements to be relaxed.
By lowering supply voltages and enhancing amplifier performance, this makes multiplier design simpler.High Power in High Frequency Harmonics: NLTLs produce transitions more quickly and with greater frequency content, which results in increased power in harmonics with higher frequencies.
Additionally, NLTLs allow for higher frequency inputs, which simplifies the construction of filters by raising the power of each harmonic and the harmonic gap. As a result, multiplier-based frequency sources can now be used at greater frequencies than with SRD-based comb generators before. The input and output bandwidths of the LPN Comb Generators span 80 MHz to 2 GHz, respectively.
The several LPN Comb Generator models are listed in Table 1 along with their input/output properties. There are now three main sub-groupings within the LPN Comb Generator product range. Models 7100, 7102, and 7103 with Low Input Power are made to function with less input power.
High Output Power (models 7110, 7112, and 7113) – Designed to operate with higher input power (similar to SRD-based comb generators) to offer maximum output harmonic levels as well as a “drop-in” replacement for SRD comb generators and improved phase noise performance.
Models 7123 and 7124 have an extended harmonic frequency range that is intended to produce more high frequency harmonic content. Comb generators are mostly used as frequency multipliers to create high frequencies that are phase-locked to the input. A classic illustration of this would be to drive the LO of a mixer in a receiver downconverter by multiplying a 100 MHz crystal reference oscillator up to a higher frequency.
