By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
A medical-grade DC/DC converter is an essential part of the healthcare sector since it can convert between different direct current voltage levels while adhering to strict medical standards and regulations. These converters are used in a variety of medical equipment and gadgets, where they are vital.
For example, they power MRI and CT scanners in medical imaging, ensuring exact image quality for diagnostic accuracy. In critical care situations, patient monitoring systems depend on them to maintain consistent power for precise data readings. These converters are used by surgical equipment, particularly robotic surgical systems, to provide precise control while performing procedures.
Their effectiveness benefits portable medical equipment by extending battery life for patient convenience. In order to ensure dependable power transmission, medical-grade DC/DC converters are also required for telemedicine devices, diagnostic equipment, and healthcare IT infrastructure.
The Global Medical Grade DC/DC Converter market accounted for $XX Billion in 2023 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2024 to 2030.
The MPS04 and MPH04 series of medical-grade single and dual output DC/DC converters, rated at up to 3.5W, were created with the medical sector in mind.
The new DC/DC converters feature the maximum level of insulation, 2MOPP, and have been certified to the most recent safety approval standard EN 60601-1, indicating that they are acceptable for all types of medical applications.
The input voltage ranges for the MPS04/MPH04 are 4.5-12, 9-18, 18-36, and 36-75VDC, and the output voltage ranges are 3.3, 5, 9, 12, 15 and 24VDC in a single output. +/-12VDC and +/-15VDC are available on dual output.
Using 82% efficiency. IEC 60601-1 Approvals for Medical Safety. Integrated short circuit protection, the absence of a minimum load requirement, and a manufacturer guarantee round out the list of extra features.
A 60W board-mount DC/DC converter from RECOM has been introduced, giving high power density and isolation of a medical-grade standard. Short-circuit and overload protection is present in the outputs.
The converters come with a choice of two pin-out configurations and an optional external control pin for standby power usage as low as 12.5mW. The three series are offered with single or dual outputs from 3.3V to 24V with input voltage ranges of 2:1 or 4:1.
A high-power, medical-grade DC/DC converter from RECOM has been unveiled. It boasts a 90% peak efficiency, a small footprint, and cutting-edge safety features. The REM60-W, according to the manufacturer, is a cost-effective solution with two input ranges: 9-36VDC and 18-75VDC.
Including 5V, 5.1V, 12V, 15V, 24V +/-12V, and +/-15V, it provides a range of finely regulated single and dual outputs. Even though it is small—only 2.3 inches by 1.5 inches by 0.5 inches (57.9 x 36.8 x 12.7 mm)—this DC/DC converter has an industry-leading power density for a 60 W component.
These converters have a peak efficiency of over 90% and can function derratically in environments up to 105°C.
The REM60-W is a high-spec, power-dense component that will be valued in demanding industrial and medical applications. The business asserts that different medical safety certificates have been received by DC/DC converters, allowing for their use.
The series is intended for use in environments with pollution degree 2 (PD2) and altitudes up to 5000m. The converters have a remote sensing, an On/Off control, and output voltage trimming. They safeguard against input under-voltage, short circuits, output overloads, and overheating.
Even under light load conditions, zero-load operation is feasible while maintaining excellent efficiency. The converters have a low standby and quiescent current. They also offer an industry-standard pin-out for simple compatibility and integration.
P-DUKE offers a creepage distance of 8 mm between the input and output as well as a working voltage of 250 Vac with reinforced insulation of 2xMOPP (patient protection) and 5000Vac isolation voltage.
The series features regulated single and dual outputs with wide 2:1 input ranges of 9-18 and 18-36V and up to 2W output power. It has full protection features including low 2 A leakage current, over-current, short-circuit, and under-voltage lockout.
