UAE INDUSTRIAL SEALS MARKET

INTRODUCTION

 Industrial seals are products used to prevent leakage, hold pressure, and deflect contamination at interfaces between components. Industrial seals are used in various reciprocating, rotating, and static applications, such as the entry point of bolts and screws, the interface between an engine block and cylinder head, or the shaft of a pump or motor.

Industrial seals can be classified into different types based on their design, material, and function. Some of the common types of industrial seals are:

• O-rings: These are circular rings made of elastomeric materials that seal the gap between two mating surfaces. O-rings are widely used for static and dynamic sealing in various industries.
• Gaskets: These are flat sheets of metal, rubber, or composite materials that seal the space between two flanges or other flat surfaces. Gaskets are mainly used for static sealing in applications such as pipes, valves, pumps, and engines
• Oil seals: These are also known as rotary shaft seals or lip seals. They seal the gap between a rotating shaft and a stationary housing. Oil seals prevent the leakage of lubricants and the ingress of contaminants in applications such as gearboxes, motors, and pumps.
• Mechanical seals: These are devices that seal the space between a rotating shaft and a stationary housing by using two sealing faces that slide against each other. Mechanical seals prevent the leakage of fluids and gases in applications such as pumps, compressors, and mixers.
• Hydraulic seals: These are seals that seal the gap between a piston and a cylinder or a rod and a bore in hydraulic systems. Hydraulic seals prevent the leakage of hydraulic fluids and maintain the pressure in applications such as cylinders, valves, and actuators

UAE INDUSTRIAL SEALS MARKET SIZE AND FORECAST

The UAE Industrial seals market accounted for $XX Billion in 2022 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2023 to 2030.

NEW PRODUCT LAUNCH

The SKF Ring Seal - TSN 513 A, 60mm ID is a V-ring seal that is used to protect bearings from contamination or as a secondary seal to protect primary seals in highly contaminated environments.

It consists of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing.The washer is protected against corrosion.

The SKF Ring Seal - TSN 513 A, 60mm ID is easy to install and cost-effective. It can be used for various applications that require sealing of rotating shafts, such as fans, blowers, pumps, and motors. It has a shaft diameter of 60 mm, a width of 11.8 mm, and a housing groove diameter of 85.5 mm. It is made of nitrile rubber with a steel element.

The SKF Seal, 90mm ID TSN 513 A is a V-ring seal that is used to protect bearings from contamination or as a secondary seal to protect primary seals in highly contaminated environments.

It consists of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion

The SKF Seal, 90mm ID TSN 513 A is easy to install and cost-effective. It can be used for various applications that require sealing of rotating shafts, such as fans, blowers, pumps, and motor.

It has a shaft diameter of 60 mm, a width of 11.8 mm, and a housing groove diameter of 85.5 mm. It is made of nitrile rubber with a steel element.

The SKF Seal, 90mm ID TSN 513 A is compatible with SKF’s range of heavy-duty pillow blocks, such as SNL and SE series.It can also be used with split plummer block housings

MARKET ANALYSIS 

SKFis a global leader in bearings, seals, lubrication, and services. They offer a wide range of industrial seals for various applications and industries, such as power transmission seals, hydraulic seals, fluid handling seals, machined seals, and materials.

Flowserve Corporationis a leading provider of flow control products and services for the global infrastructure markets. They offer a variety of industrial seals for pumps, valves, compressors, and other rotating equipment, such as mechanical seals, gas seals, dry gas seals, and seal support systems.

John Craneis a global leader in engineered technology solutions for rotating equipment. They provide innovative sealing solutions for oil and gas, chemical, pharmaceutical, mining, and other industries, such as mechanical seals, seal support systems, packing and gaskets, couplings, and filtration systems.

Trelleborg ABis a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments. They offer a range of industrial seals for various sectors and applications, such as O-rings, gaskets, rotary seals, hydraulic seals, pneumatic seals, and engineered molded parts.

EnPro Industriesis a diversified manufacturer of proprietary engineered products used in critical applications. They offer a portfolio of sealing products under the Garlock brand name, such as compression packing, gasketing products, hydraulic components, dynamic seals, and expansion joints .

Dover Corporationis a diversified global manufacturer of innovative equipment and components. They offer a range of industrial sealing solutions under the Waukesha Bearings brand name, such as hydrodynamic bearings, magnetic bearings, brush seals, and bearing isolators

COMPANY PROFILE

1. SKF
2. Flowserve Corporation 
3. John Crane 
4. Trelleborg AB
5. EnPro Industries
6. Dover Corporation 

THIS REPORT WILL ANSWER FOLLOWING QUESTIONS

1. How many Industrial seals are manufactured per annum UAE? Who are the sub-component suppliers in different regions?
2. Cost breakup of a UAE Industrial seals and key vendor selection criteria
3. Where is the Industrial seals manufactured? What is the average margin per unit?
4. Market share of UAE Industrial seals market manufacturers and their upcoming products
5. Cost advantage for OEMs who manufacture UAE Industrial seals in-house
6. key predictions for next 5 years in UAE Industrial seals market
7. Average B-2-B Industrial seals market price in all segments
8. Latest trends in Industrial seals market, by every market segment
9. The market size (both volume and value) of the Industrial seals market in 2023-2030 and every year in between?
10. Production breakup of Industrial seals market, by suppliers and their OEM relationship