By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
In order to replace or alter the naturally occurring film of aluminium oxide, the pretreatment can be either a chemical or an electrolytic procedure. The chemical method is more common, with several iterations for uses in architecture or transportation as well as food packaging (to satisfy laws).
Performance is therefore influenced by both the chemistry and the structure of the pretreatment layer. The success or failure of the finished product may depend on achieving the proper structure.
A minor but crucial piece in a multibillion-dollar industry, aluminium pretreatment is. However, the demands on pretreatment surfaces have increased significantly in the twenty-first century due to industry standards for failure minimization and control, as well as increased competitiveness and faster production rates.
After the metal has been cleaned of any film, oil, etc., the pretreatment solution is next applied. Aluminum may be protected from corrosion and has its surface ready for coatings after pretreatment. This preparation will improve any subsequent paint or powder coating and aid in their greater aluminium adhesion.
The Global pretreated aluminum market accounted for $XX Billion in 2021 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2022 to 2030.
aluminium before treatment
The cleaning of the strip that comes before and the coating that comes after are frequently linked with the preparation of the aluminium.
Historically, formulations based on chromium (VI) offered excellent performance as pretreatments for coil-coated aluminum. But because chromium (VI) is toxic, significant effort has been made to create more environmentally and health-friendly alternative pre-treatments.
The pretreatment is typically a no-rinse chrome chemical type and is roller coated onto both sides of the strip. Pretreatment typically amounts to 120 mg/m2 dry coating weight. Drying the pretreatment typically involves heating the strip in a hot air oven until the metal reaches a temperature of between 40 and 60 °C.
Effective anodizing in a hot electrolyte using liquid contacts is a different electrolytic pretreatment method. A cell is divided into two or more compartments, with electrodes in each compartment, and contains an electrolyte (for example, 20% sulfuric acid).
