By submitting this form, you are agreeing to the Terms of Use and Privacy Policy.
An aerosol is a small amount of liquid sprayed or misted into the air. It is frequently utilised to discharge goods like paint, deodorant, and hairspray. Inhalers for asthma can also administer medication through aerosols.
By applying pressure to a small aperture and forcing a liquid through, aerosols are produced. Tiny droplets of the liquid separate and float in the air. Because the droplets are so tiny, they can linger in the air for a very long time.
If handled improperly, aerosols might be harmful. When exposed to heat or sparks, they have the potential to ignite and explode. If aerosols are released into the air, they can also harm the environment.
It’s crucial to utilise aerosols sensibly and safely. Before using an aerosol, always read the directions on the product label. Use aerosols away from heat sources and sparks. and eliminate Small, pressurised canisters called aerosol cans hold a chemical that, when opened, is emitted as a mist, spray, or foam. The aerosol can’s five main components are as follows:
The drug that the consumer intends to utilise is the active ingredient. It could be a product that releases harmful chemicals, like paint or insecticide, or it could be something safe, like cooking oil or whipped cream.
Solvent: The solvent determines the particle size, drying time, and consistency of the active component.
Can: Leak-proof steel or aluminium is used to make aerosol cans. They enable the inside materials to be pressurised while defending the ingredients from tainting and evaporation.
By pressing a button on the can’s top, you can open the valve. A mounting cup, inner and outer gaskets, a spring, a valve seat, and a dip tube are some of the metal parts that make up this system.
Before using, shake aerosol cans thoroughly to combine the propellant and active ingredient. Additionally, shaking aids in avoiding the development of clumps or bubbles within the substance.
Aerosol cans are hazardous because of the peculiar mixture of substances they carry under pressure inside THE metal container.
The ability of aerosol cans to ignite or explode other Dangerous Goods and Hazardous Substances is the aerosol cans’ most serious problem in the workplace.
Hazardous substances include adhesives, pesticides, automotive sprays, solvents, cleaners, paints, and varnishes. These substances can harm workers if they breathe them in or absorb them through their skin. Supervisors must read Safety Data Sheets (SDSs) before allowing any new chemical into the workplace, however when the substance is placed in a container, this procedure is frequently forgotten.
Many industrial accidents happen when aerosol cans are left in the sun, in a car, or next to heated equipment. When they attempted to use a sun-dried can of spray paint, two Australian workers were wounded. In one of the people’s hands, the can broke.
The Yemen Aerosol Cans Market accounted for $XX Billion in 2023 and is anticipated to reach $XX Billion by 2030, registering a CAGR of XX% from 2024 to 2030.
Aptar Pharma has launched APF Futurity, a metal-free, multi dose nasal spray pump that is recyclable. This is in response to the growing demand for recyclable products, as 77% of respondents to an Aptar poll said it is important that the products they buy can be recycled.
Traditionally, nasal sprays have contained metal parts that make them difficult to recycle. While the plastic may be recyclable, the need to separate or detach parts before disposal is an impediment to the material actually being recycled.
Aptar developed APF Futurity to eliminate this barrier to recycling. The device is made from polyolefin materials and is free from metal parts and recycling disruptors. As such, APF Futurity should minimize the need to separate components in recycling streams and support a higher quality of recyclates.
Aptar has received third-party validation of its claims about the recyclability of APF Futurity. Cyclos-HTP, a company specializing in the recyclability of packaging and goods, certified that the nasal spray is 90% to 95% recyclable. The certification categorizes the device as highly recyclable.
The device is designed for the delivery of nasal saline and other comparable over-the-counter products. Aptar framed the launch as part of a broader push to make its nasal spray portfolio more sustainable.
Overall, APF Futurity is a significant step forward in Aptar’s sustainability journey and meets the global need for sustainable packaging solutions that are easy to recycle.
